[PATCH 05/17] arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
André Draszik
andre.draszik at linaro.org
Tue Apr 16 05:21:15 PDT 2024
Hi Pete,
On Tue, 2024-04-16 at 12:56 +0100, Peter Griffin wrote:
> Hi André,
>
> Thanks for the review.
>
> On Fri, 5 Apr 2024 at 08:38, André Draszik <andre.draszik at linaro.org> wrote:
> >
> > On Thu, 2024-04-04 at 13:25 +0100, Peter Griffin wrote:
> > > Enable the cmu_hsi2 clock management unit. It feeds some of
> > > the high speed interfaces such as PCIe and UFS.
> > >
> > > Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> > > ---
> > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 12 ++++++++++++
> > > 1 file changed, 12 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > > index eddb6b326fde..38ac4fb1397e 100644
> > > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > > @@ -1253,6 +1253,18 @@ pinctrl_hsi1: pinctrl at 11840000 {
> > > interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
> > > };
> > >
> > > + cmu_hsi2: clock-controller at 14400000 {
> > > + compatible = "google,gs101-cmu-hsi2";
> > > + reg = <0x14400000 0x4000>;
> > > + #clock-cells = <1>;
> > > + clocks = <&ext_24_5m>,
> > > + <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
> > > + <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
> > > + <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
> > > + <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
> > > + clock-names = "oscclk", "bus", "pcie", "ufs_embd", "mmc_card";
> > > + };
> >
> > This doesn't build because you didn't add the clock ids in the binding patch.
>
> These clock IDs are for cmu_top, not cmu_hsi2.
Right. I replied to the wrong patch. Sorry for that. It is patch 7 that
uses clock ids that are only added in patch 8. The clock ids from patch 8
in include/dt-bindings/clock/google,gs101.h should be added in patch 1
instead.
Cheers,
Andre'
More information about the linux-arm-kernel
mailing list