[PATCH v2] ARM: dts: bcm2835: Enable 3D rendering through V3D
Stefan Wahren
wahrenst at gmx.net
Mon Apr 15 22:30:24 PDT 2024
Hi Maíra,
Am 16.04.24 um 03:02 schrieb Maíra Canal:
> On 4/15/24 13:54, Andre Przywara wrote:
>> On Mon, 15 Apr 2024 13:00:39 -0300
>> Maíra Canal <mcanal at igalia.com> wrote:
>>
>> Hi,
>>
>>> RPi 0-3 is packed with a GPU that provides 3D rendering capabilities to
>>> the RPi. Currently, the downstream kernel uses an overlay to enable the
>>> GPU and use GPU hardware acceleration. When deploying a mainline kernel
>>> to the RPi 0-3, we end up without any GPU hardware acceleration
>>> (essentially, we can't use the OpenGL driver).
>>>
>>> Therefore, enable the V3D core for the RPi 0-3 in the mainline kernel.
>>
>> So I think Krzysztof's initial comment still stands: What does that
>> patch
>> actually change? If I build those DTBs as of now, none of them has a
>> status property in the v3d node. Which means it's enabled:
>> https://github.com/devicetree-org/devicetree-specification/blob/main/source/chapter2-devicetree-basics.rst#status
>>
>> So adding an explicit 'status = "okay";' doesn't make a difference.
>>
>> What do I miss here?
>
> As mentioned by Stefan in the last version, in Raspberry Pi OS, there is
> a systemd script which is trying to check for the V3D driver (/usr/lib
> /systemd/scripts/gldriver_test.sh). Within the first check, "raspi-
> config nonint is_kms" is called, which always seems to fail. What
> "raspi-config" does is check if
> /proc/device-tree/soc/v3d at 7ec00000/status is equal to "okay". As
> /proc/device-tree/soc/v3d at 7ec00000/status doesn't exists, it returns
> false.
yes, but i also mention that the V3D driver starts without this patch.
The commit message of this patch suggests this is a DT issue, which is not.
I hadn't the time to update my SD card to Bookworm yet. Does the issue
still exists with this version?
>
> I'll send if I can improve the userspace tool by just checking if the
> folder /proc/device-tree/soc/v3d at 7ec00000/ exists.
>
> Thanks for the explanation!
>
> Best Regards,
> - Maíra
>
>>
>> Cheers,
>> Andre
>>
>>> Signed-off-by: Maíra Canal <mcanal at igalia.com>
>>> ---
>>>
>>> v1 -> v2:
>>> https://lore.kernel.org/dri-devel/41694292-af1f-4760-a7b6-101ed5dd6f9d@gmx.net/T/
>>>
>>> * As mentioned by Krzysztof, enabling should be done in last place of
>>> override/extend. Therefore, I'm disabling V3D in the common dtsi
>>> and enabling in the last place of extend, i.e. the RPi DTS files.
>>>
>>> arch/arm/boot/dts/broadcom/bcm2835-common.dtsi | 1 +
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts | 4 ++++
>>> arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts | 4 ++++
>>> 15 files changed, 57 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
>>> b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
>>> index 9261b67dbee1..69e34831de51 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
>>> @@ -139,6 +139,7 @@ v3d: v3d at 7ec00000 {
>>> compatible = "brcm,bcm2835-v3d";
>>> reg = <0x7ec00000 0x1000>;
>>> interrupts = <1 10>;
>>> + status = "disabled";
>>> };
>>> vc4: gpu {
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
>>> index 069b48272aa5..495ab1dfd2ce 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
>>> @@ -128,3 +128,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
>>> index 2726c00431e8..4634d88ce3af 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
>>> @@ -121,3 +121,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
>>> index c57b999a4520..45fa0f6851fc 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
>>> @@ -130,3 +130,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
>>> index ae6d3a9586ab..c1dac5d704aa 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
>>> @@ -121,3 +121,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
>>> index 72764be75a79..72ca31f2a7d6 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
>>> @@ -115,3 +115,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
>>> index 3f9d198ac3ab..881a07d2f28f 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
>>> @@ -95,3 +95,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
>>> index 1f0b163e400c..1c7324067442 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
>>> @@ -134,6 +134,10 @@ &uart1 {
>>> status = "okay";
>>> };
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> +
>>> &wifi_pwrseq {
>>> reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
>>> };
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
>>> index 539c19c10946..1568ddc78f22 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
>>> @@ -117,3 +117,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
>>> index 79918033750e..8fab6293d1c7 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
>>> @@ -129,3 +129,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
>>> index 3548306dfbcb..dc45b56054c7 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
>>> @@ -156,3 +156,7 @@ &uart1 {
>>> pinctrl-0 = <&uart1_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
>>> index 2f1800cbc522..ce3a9f7ff529 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
>>> @@ -161,3 +161,7 @@ &uart1 {
>>> &wifi_pwrseq {
>>> reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
>>> index 61270340075c..e398546d105b 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
>>> @@ -149,6 +149,10 @@ &sdhost {
>>> bus-width = <4>;
>>> };
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> +
>>> &wifi_pwrseq {
>>> reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
>>> };
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
>>> index 72d26d130efa..50471ada79b3 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
>>> @@ -94,3 +94,7 @@ &uart0 {
>>> pinctrl-0 = <&uart0_gpio14>;
>>> status = "okay";
>>> };
>>> +
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
>>> b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
>>> index 85cf594724ef..876f697e7300 100644
>>> --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
>>> +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
>>> @@ -132,6 +132,10 @@ &uart1 {
>>> status = "okay";
>>> };
>>> +&v3d {
>>> + status = "okay";
>>> +};
>>> +
>>> &wifi_pwrseq {
>>> reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
>>> };
>>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list