[PATCH 3/6] arm64: dts: broadcom: Add support for BCM2712

[Stefan Wahren]

Hi Phil,

Am 15.04.24 um 10:52 schrieb Phil Elwell:
> Stefan,
>
>
> On Mon, 15 Apr 2024 at 09:20, Stefan Wahren <wahrenst at gmx.net> wrote:
>> Hi Phil,
>>
>> Am 14.04.24 um 00:14 schrieb Andrea della Porta:
>>> Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
>>> ---
>>>    arch/arm64/boot/dts/broadcom/Makefile         |   1 +
>>>    .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 313 +++++++
>>>    arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi |  81 ++
>>>    arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 841 ++++++++++++++++++
>>>    4 files changed, 1236 insertions(+)
>>>    create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>>>    create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
>>>    create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
>>> index 8b4591ddd27c..92565e9781ad 100644
>>> --- a/arch/arm64/boot/dts/broadcom/Makefile
>>> +++ b/arch/arm64/boot/dts/broadcom/Makefile
>>> @@ -6,6 +6,7 @@ DTC_FLAGS := -@
>>>    dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
>>>                              bcm2711-rpi-4-b.dtb \
>>>                              bcm2711-rpi-cm4-io.dtb \
>>> +                           bcm2712-rpi-5-b.dtb \
>>>                              bcm2837-rpi-3-a-plus.dtb \
>>>                              bcm2837-rpi-3-b.dtb \
>>>                              bcm2837-rpi-3-b-plus.dtb \
>>> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>>> new file mode 100644
>>> index 000000000000..2ce180a54e5b
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>>> @@ -0,0 +1,313 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/pwm/pwm.h>
>>> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
>>> +
>>> +#define spi0 _spi0
>>> +#define uart0 _uart0
>>> +
>>> +#include "bcm2712.dtsi"
>>> +
>>> +#undef spi0
>>> +#undef uart0
>>> +
>>> +/ {
>>> +     compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
>>> +     model = "Raspberry Pi 5";
>>> +
>>>
>> according to this downstream commit [1] it's just called "Raspberry Pi
>> 5" without Model B, but the filename and the compatible says something
>> different. Is there still a chance to get this consistent or is it too
>> late because the firmware expect the compatible?
>>
>> [1] -
>> https://github.com/raspberrypi/linux/commit/99e359d2f2da2c820fd2a30b1ad08b32c9549adb
> Nothing cares about the compatible string, but the product name was
> changed too late for the firmware, which expects the current DTB file
> name.
should i send a pull request to address the compatible? This would avoid
a little bit confusion in the upstreaming process, because
devicetree/bindings/arm/bcm/bcm2835.yaml needs to be updated as well.

Best regards
>   I'm happy with the naming as it stands, since we use Pi 4 to
> refer to all the BCM2711-based devices, and Pi 5 can include CM5.
>
> Phil