[PATCH 3/6] arm64: dts: broadcom: Add support for BCM2712

[Stefan Wahren]

Hi Phil,

Am 14.04.24 um 00:14 schrieb Andrea della Porta:
> Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> ---
>   arch/arm64/boot/dts/broadcom/Makefile         |   1 +
>   .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 313 +++++++
>   arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi |  81 ++
>   arch/arm64/boot/dts/broadcom/bcm2712.dtsi     | 841 ++++++++++++++++++
>   4 files changed, 1236 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi.dtsi
>   create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi
>
> diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
> index 8b4591ddd27c..92565e9781ad 100644
> --- a/arch/arm64/boot/dts/broadcom/Makefile
> +++ b/arch/arm64/boot/dts/broadcom/Makefile
> @@ -6,6 +6,7 @@ DTC_FLAGS := -@
>   dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
>   			      bcm2711-rpi-4-b.dtb \
>   			      bcm2711-rpi-cm4-io.dtb \
> +			      bcm2712-rpi-5-b.dtb \
>   			      bcm2837-rpi-3-a-plus.dtb \
>   			      bcm2837-rpi-3-b.dtb \
>   			      bcm2837-rpi-3-b-plus.dtb \
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> new file mode 100644
> index 000000000000..2ce180a54e5b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> @@ -0,0 +1,313 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
> +
> +#define spi0 _spi0
> +#define uart0 _uart0
> +
> +#include "bcm2712.dtsi"
> +
> +#undef spi0
> +#undef uart0
> +
> +/ {
> +	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
> +	model = "Raspberry Pi 5";
> +
>
according to this downstream commit [1] it's just called "Raspberry Pi
5" without Model B, but the filename and the compatible says something
different. Is there still a chance to get this consistent or is it too
late because the firmware expect the compatible?

[1] -
https://github.com/raspberrypi/linux/commit/99e359d2f2da2c820fd2a30b1ad08b32c9549adb