[PATCH v5 00/12] Revise Meta(Facebook) Harma BMC(AST2600)

[Andrew Jeffery]

On Fri, 2024-04-12 at 17:15 +0800, Peter Yin wrote:
> Summary:
> Revise linux device tree entry related to Meta(Facebook) Harma
> specific devices connected to BMC(AST2600) SoC.
> 
> Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
> 
> Change log:
> 
> v4 -> v5
>   - Patch 0011 - Add retimer device
>   - Patch 0012 - Modify gpio line name
> 
> v3 -> v4
>   - Patch 0010 - Revise node name
>   - fixed PDB temperature node name in Patch 0006
> 
> v2 -> v3
>   - Patch 0007 - Revise max31790 address
>   - Patch 0008 - Harma: Add NIC Fru device
>   - Patch 0009 - Add ltc4286 device
> 
> v1 -> v2
>   - Add infineon,slb9670 information for tpm.
>   - Patch 0006 - Add PDB temperature.
> 
> v1
>   - Patch 0001 - Revise SGPIO line name.
>   - Patch 0002 - Mapping ttyS2 to UART4.
>   - Patch 0003 - Remove Vuart.
>   - Patch 0004 - Add cpu power good line name.
>   - Patch 0005 - Add spi-gpio.
> 
> Peter Yin (12):
>   ARM: dts: aspeed: Harma: Revise SGPIO line name.
>   ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
>   ARM: dts: aspeed: Harma: Remove Vuart
>   ARM: dts: aspeed: Harma: Add cpu power good line name
>   ARM: dts: aspeed: Harma: Add spi-gpio
>   ARM: dts: aspeed: Harma: Add PDB temperature
>   ARM: dts: aspeed: Harma: Revise max31790 address
>   ARM: dts: aspeed: Harma: Add NIC Fru device
>   ARM: dts: aspeed: Harma: Add ltc4286 device
>   ARM: dts: aspeed: Harma: Revise node name
>   ARM: dts: aspeed: Harma: Add retimer device
>   ARM: dts: aspeed: Harma: Modify GPIO line name
> 
>  .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 107 ++++++++++++++----
>  1 file changed, 85 insertions(+), 22 deletions(-)
> 

Joel had applied an earlier version of this series to his for-next
branch. I'm collecting patches targeting it while he's on leave. I've
updated the series he'd applied to the v5 you've posted here.

Can you please post any further changes as patches on top? You can find
my branch here:

https://github.com/amboar/linux/tree/for/bmc/dt-6.10

Andrew