[PATCH 3/4] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200

Arınç ÜNAL arinc.unal at arinc9.com
Sun Apr 14 09:59:44 PDT 2024


On 14.04.2024 17:13, Krzysztof Kozlowski wrote:
> On 14/04/2024 13:46, Arınç ÜNAL via B4 Relay wrote:
>> From: Arınç ÜNAL <arinc.unal at arinc9.com>
>>
>> Add the device tree for ASUS RT-AC3200 which is an AC3200 router featuring
>> 5 Ethernet ports over the integrated Broadcom switch.
>>
>> Hardware info:
>> * Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz
>> * Switch: BCM53012 in BCM4709A0
>> * DDR3 RAM: 256 MB
>> * Flash: 128 MB
>> * 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC
>> * 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC
>> * Ports: 4 LAN Ports, 1 WAN Port
>>
>> Co-developed-by: Tom Brautaset <tbrautaset at gmail.com>
>> Signed-off-by: Tom Brautaset <tbrautaset at gmail.com>
>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>> ---
>>   arch/arm/boot/dts/broadcom/Makefile                |   1 +
>>   .../boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts   | 164 +++++++++++++++++++++
>>   2 files changed, 165 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
>> index 7099d9560033..c61fca514775 100644
>> --- a/arch/arm/boot/dts/broadcom/Makefile
>> +++ b/arch/arm/boot/dts/broadcom/Makefile
>> @@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
>>   	bcm47081-luxul-xap-1410.dtb \
>>   	bcm47081-luxul-xwr-1200.dtb \
>>   	bcm47081-tplink-archer-c5-v2.dtb \
>> +	bcm4709-asus-rt-ac3200.dtb \
>>   	bcm4709-asus-rt-ac87u.dtb \
>>   	bcm4709-buffalo-wxr-1900dhp.dtb \
>>   	bcm4709-linksys-ea9200.dtb \
>> diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
>> new file mode 100644
>> index 000000000000..8640dda211ae
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
>> @@ -0,0 +1,164 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>> +/*
>> + * Author: Tom Brautaset <tbrautaset at gmail.com>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "bcm4709.dtsi"
>> +#include "bcm5301x-nand-cs0-bch8.dtsi"
>> +
>> +#include <dt-bindings/leds/common.h>
>> +
>> +/ {
>> +	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
>> +	model = "ASUS RT-AC3200";
>> +
>> +	chosen {
>> +		bootargs = "console=ttyS0,115200 earlycon";
> 
> 1. Use stdout.
> 2. Drop earlycon, it is for debugging, not regular mainline usage.

I see that bcm4708.dtsi which this device tree includes already describes
stdout-path with the same value so I'll just get rid of the chosen node
here.

> 
>> +	};
>> +
>> +	memory at 0 {
>> +		device_type = "memory";
>> +		reg = <0x00000000 0x08000000>,
>> +		      <0x88000000 0x08000000>;
>> +	};
>> +
>> +	nvram at 1c080000 {
>> +		compatible = "brcm,nvram";
>> +		reg = <0x1c080000 0x00180000>;
> 
> Why is this outside of soc? Both soc node and soc DTSI?

I don't maintain the SoC device tree files so I don't know. The nvram node
doesn't exist on any of the device tree files included by this device tree.

Arınç



More information about the linux-arm-kernel mailing list