[PATCH v3 3/4] arm64: dts: add description for solidrun cn9130 som and clearfog boards

[Krzysztof Kozlowski]

On 14/04/2024 15:02, Josua Mayer wrote:
> Am 14.04.24 um 14:58 schrieb Josua Mayer:
>> Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro
>> reference boards.
>>
>> The SoM has been designed as a pin-compatible replacement for the older
>> Armada 388 based SoM. Therefore it supports the same boards and a
>> similar feature set.
>>
>> Most notable upgrades:
>> - 4x Cortex-A72
>> - 10Gbps SFP
>> - Both eMMC and SD supported at the same time
>>
>> The developer first supporting this product at SolidRun decided to use
>> different filenames for the DTBs: Armada 388 uses the full
>> "clearfog" string while cn9130 uses the abbreviation "cf".
>> This name is already hard-coded in pre-installed vendor u-boot and can
>> not be changed easily.
>>
>> NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
>> CN9130 SoM has a different footprint from Armada 388 SoM.
>> Components on the carrier board below the SoM may collide causing
>> damage, such as on Clearfog Base.
>>
>> Signed-off-by: Josua Mayer <josua at solid-run.com>
>> ---
> 
> Previous version had received an ack from Krzysztof Kozlowski,
> which I dropped because I made additional changes.
> 
> To simplify review, please find below
> the incremental changes from v2 to v3:

If you send patches correctly, b4 gives diff, so no need for this diff here.

Best regards,
Krzysztof