[PATCH net 3/4] net: stmmac: Fix IP-cores specific MAC capabilities
Serge Semin
fancer.lancer at gmail.com
Fri Apr 12 11:03:16 PDT 2024
Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:
DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100
DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD
DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD
DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux at armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer at gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++
.../ethernet/stmicro/stmmac/dwmac1000_core.c | 2 ++
.../ethernet/stmicro/stmmac/dwmac100_core.c | 2 ++
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++------
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 18 ++++++++----------
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++---
7 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index a6fefe675ef1..3b7d4ac1e7be 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -553,6 +553,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
struct mac_link {
+ u32 caps;
u32 speed_mask;
u32 speed10;
u32 speed100;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index b21d99faa2d0..e1b761dcfa1d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
priv->dev->priv_flags |= IFF_UNICAST_FLT;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
/* The loopback bit seems to be re-set when link change
* Simply mask it each time
* Speed 10/100/1000 are set in BIT(2)/BIT(3)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 3927609abc44..8555299443f4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
mac->link.duplex = GMAC_CONTROL_DM;
mac->link.speed10 = GMAC_CONTROL_PS;
mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index a6e8d7bd9588..7667d103cd0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv)
dev_info(priv->device, "\tDWMAC100\n");
mac->pcsr = priv->ioaddr;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
mac->link.duplex = MAC_CONTROL_F;
mac->link.speed10 = 0;
mac->link.speed100 = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ec6a13e644b3..a38226d7cc6a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -70,14 +70,10 @@ static void dwmac4_core_init(struct mac_device_info *hw,
static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
{
- priv->phylink_config.mac_capabilities |= MAC_2500FD;
-
if (priv->plat->tx_queues_to_use > 1)
- priv->phylink_config.mac_capabilities &=
- ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+ priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
else
- priv->phylink_config.mac_capabilities |=
- (MAC_10HD | MAC_100HD | MAC_1000HD);
+ priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD);
}
static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
@@ -1385,6 +1381,8 @@ int dwmac4_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
mac->link.duplex = GMAC_CONFIG_DM;
mac->link.speed10 = GMAC_CONFIG_PS;
mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index e841e312077e..f8e7775bb633 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN);
}
-static void xgmac_phylink_get_caps(struct stmmac_priv *priv)
-{
- priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD |
- MAC_10000FD | MAC_25000FD |
- MAC_40000FD | MAC_50000FD |
- MAC_100000FD;
-}
-
static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable)
{
u32 tx = readl(ioaddr + XGMAC_TX_CONFIG);
@@ -1540,7 +1532,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *
const struct stmmac_ops dwxgmac210_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxgmac2_rx_queue_enable,
@@ -1601,7 +1592,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
const struct stmmac_ops dwxlgmac2_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxlgmac2_rx_queue_enable,
@@ -1661,6 +1651,9 @@ int dwxgmac2_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD | MAC_2500FD | MAC_5000FD |
+ MAC_10000FD;
mac->link.duplex = 0;
mac->link.speed10 = XGMAC_CONFIG_SS_10_MII;
mac->link.speed100 = XGMAC_CONFIG_SS_100_MII;
@@ -1698,6 +1691,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD | MAC_2500FD | MAC_5000FD |
+ MAC_10000FD | MAC_25000FD |
+ MAC_40000FD | MAC_50000FD |
+ MAC_100000FD;
mac->link.duplex = 0;
mac->link.speed1000 = XLGMAC_CONFIG_SS_1000;
mac->link.speed2500 = XLGMAC_CONFIG_SS_2500;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b8a1f02398ee..7c6fb14b5555 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1225,12 +1225,11 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
xpcs_get_interfaces(priv->hw->xpcs,
priv->phylink_config.supported_interfaces);
- priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10 | MAC_100 | MAC_1000;
-
/* Get the MAC specific capabilities */
stmmac_mac_phylink_get_caps(priv);
+ priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
max_speed = priv->plat->max_speed;
if (max_speed)
phylink_limit_mac_speed(&priv->phylink_config, max_speed);
@@ -7344,6 +7343,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
stmmac_mac_phylink_get_caps(priv);
+ priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
max_speed = priv->plat->max_speed;
if (max_speed)
phylink_limit_mac_speed(&priv->phylink_config, max_speed);
--
2.43.0
More information about the linux-arm-kernel
mailing list