[PATCH net-next 4/4] net: stmmac: Move MAC caps init to phylink MAC caps getter

Serge Semin fancer.lancer at gmail.com
Fri Apr 12 11:03:17 PDT 2024


After a set of fixes the stmmac_phy_setup() and stmmac_reinit_queues()
method have turned to having some duplicated code. Let's get rid from the
duplication by moving the MAC-capabilities initialization to the PHYLINK
MAC-capabilities getter. The getter is called during each network device
interface open/close cycle. So the MAC-capabilities will be initialized in
normal device functioning and in case of the Tx/Rx queues
re-initialization as the original code semantics implies.

Signed-off-by: Serge Semin <fancer.lancer at gmail.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++----------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7c6fb14b5555..cb72dd93191e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
 			priv->pause, tx_cnt);
 }
 
+static unsigned long stmmac_mac_get_caps(struct phylink_config *config,
+					 phy_interface_t interface)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+	/* Get the MAC-specific capabilities */
+	stmmac_mac_phylink_get_caps(priv);
+
+	config->mac_capabilities = priv->hw->link.caps;
+
+	if (priv->plat->max_speed)
+		phylink_limit_mac_speed(config, priv->plat->max_speed);
+
+	return config->mac_capabilities;
+}
+
 static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
 						 phy_interface_t interface)
 {
@@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 }
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+	.mac_get_caps = stmmac_mac_get_caps,
 	.mac_select_pcs = stmmac_mac_select_pcs,
 	.mac_config = stmmac_mac_config,
 	.mac_link_down = stmmac_mac_link_down,
@@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 	int mode = priv->plat->phy_interface;
 	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
-	int max_speed;
 
 	priv->phylink_config.dev = &priv->dev->dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		xpcs_get_interfaces(priv->hw->xpcs,
 				    priv->phylink_config.supported_interfaces);
 
-	/* Get the MAC specific capabilities */
-	stmmac_mac_phylink_get_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
@@ -7327,7 +7334,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret = 0, i;
-	int max_speed;
 
 	if (netif_running(dev))
 		stmmac_release(dev);
@@ -7341,14 +7347,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 									rx_cnt);
 
-	stmmac_mac_phylink_get_caps(priv);
-
-	priv->phylink_config.mac_capabilities = priv->hw->link.caps;
-
-	max_speed = priv->plat->max_speed;
-	if (max_speed)
-		phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
 	stmmac_napi_add(dev);
 
 	if (netif_running(dev))
-- 
2.43.0




More information about the linux-arm-kernel mailing list