[PATCH v3 2/6] dt-bindings: firmware: add i.MX95 SCMI Extension protocol

[Rob Herring]

On Fri, Apr 12, 2024 at 06:47:08PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Add i.MX SCMI Extension protocols bindings for:
>  - Battery Backed Module(BBM) Protocol
>    This contains persistent storage (GPR), an RTC, and the ON/OFF button.
>    The protocol can also provide access to similar functions implemented via
>    external board components.
>  - MISC Protocol.
>    This includes controls that are misc settings/actions that must be exposed
>    from the SM to agents. They are device specific and are usually define to
>    access bit fields in various mix block control modules, IOMUX_GPR, and other
>    GPR/CSR owned by the SM.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../devicetree/bindings/firmware/arm,scmi.yaml     | 21 +++++++++++++
>  .../bindings/firmware/nxp,imx95-scmi.yaml          | 36 ++++++++++++++++++++++
>  2 files changed, 57 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> index 93fb7d05f849..fa2cc910c485 100644
> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> @@ -247,6 +247,27 @@ properties:
>        reg:
>          const: 0x18
>  
> +  protocol at 81:
> +    $ref: '#/$defs/protocol-node'
> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        const: 0x81
> +
> +  protocol at 84:
> +    type: object
> +    anyOf:
> +      - allOf:
> +          - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
> +          - $ref: '#/$defs/protocol-node'

If you put the ref under the protocol node, then it's 1 schema file per 
protocol per vendor. Also, we then have to list every possible protocol 
node here, and every one listed here will be valid for every vendor.  
What we discussed is putting the list of vendor protocol schemas at the 
top-level here and then the vendor schemas can list out all the protocol 
nodes.

Also, move "$ref: '#/$defs/protocol-node'" to nxp,imx95-scmi.yaml.

> +
> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        const: 0x84
> +
>  additionalProperties: false
>  
>  $defs:
> diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
> new file mode 100644
> index 000000000000..b84c4a53b78a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
> @@ -0,0 +1,36 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2024 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension
> +
> +maintainers:
> +  - Peng Fan <peng.fan at nxp.com>
> +
> +properties:
> +  nxp,wakeup-sources:
> +    description:
> +      Each entry consists of 2 integers, represents the source and electric signal edge
> +    items:
> +      items:
> +        - description: the wakeup source
> +        - description: the wakeup electric signal edge
> +    minItems: 1
> +    maxItems: 32
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +
> +if:
> +  properties:
> +    reg:
> +      const: 0x84

This schema is only included from protocol at 84 node, so how can this be 
false?

> +then:
> +  properties:
> +    nxp,wakeup-sources: true
> +else:
> +  properties:
> +    nxp,wakeup-sources: false
> +
> +additionalProperties: true
> 
> -- 
> 2.37.1
>