[PATCH v10 3/4] clk: stm32: introduce clocks for STM32MP257 platform

[Gabriel FERNANDEZ]

On 4/11/24 08:36, Stephen Boyd wrote:
> Quoting gabriel.fernandez at foss.st.com (2024-04-09 10:12:40)
>> diff --git a/drivers/clk/stm32/clk-stm32mp25.c b/drivers/clk/stm32/clk-stm32mp25.c
>> new file mode 100644
>> index 000000000000..23876e7d9863
>> --- /dev/null
>> +++ b/drivers/clk/stm32/clk-stm32mp25.c
>> @@ -0,0 +1,1876 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
>> + * Author: Gabriel Fernandez <gabriel.fernandez at foss.st.com> for STMicroelectronics.
>> + */
>> +
>> +#include <linux/clk.h>
> Use clk-provider.h not clk.h
ok
>
>> +#include <linux/of_address.h>
> Doubt this is the right include. Drop?

yes i will drop


>> +#include <linux/platform_device.h>
>> +
>> +#include "clk-stm32-core.h"
>> +#include "reset-stm32.h"
>> +#include "stm32mp25_rcc.h"
>> +
>> +#include <dt-bindings/clock/st,stm32mp25-rcc.h>
> [...]
>> +       .clock_data     = &stm32mp25_clock_data,
>> +       .reset_data     = &stm32mp25_reset_data,
>> +};
>> +
>> +static const struct of_device_id stm32mp25_match_data[] = {
>> +       { .compatible = "st,stm32mp25-rcc", .data = &stm32mp25_data, },
>> +       { }
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32mp25_match_data);
>> +
>> +static int stm32mp25_rcc_clocks_probe(struct platform_device *pdev)
>> +{
>> +       struct device *dev = &pdev->dev;
>> +       void __iomem *base;
>> +
>> +       base = devm_platform_ioremap_resource(pdev, 0);
>> +       if (WARN_ON(IS_ERR(base)))
> Drop WARN_ON

ok

Thank's

Best Regards

Gabriel


>> +               return PTR_ERR(base);