[PATCH] ARM: multi_v7_defconfig: Select CONFIG_USB_ONBOARD_DEV as built-in

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Selecting CONFIG_USB_ONBOARD_DEV as a module may cause the following
run-time error when probing a USB2514 hub on a imx6q-udoo board:

usb 1-1: device not accepting address 5, error -71
usb usb1-port1: unable to enumerate USB device

Fix this issue by selecting CONFIG_USB_ONBOARD_DEV as built-in so
that the USB hub reset line and clock can be activated earlier.  

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Here is the imx6q-udoo boot log from Mark's farm that shows the problem:

https://storage.kernelci.org/next/master/next-20240408/arm/multi_v7_defconfig/gcc-10/lab-broonie/baseline-imx6dl-udoo.html

 arch/arm/configs/multi_v7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 86bf057ac366..1cc5f2c1a0c6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -885,7 +885,7 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
-CONFIG_USB_ONBOARD_DEV=m
+CONFIG_USB_ONBOARD_DEV=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
 CONFIG_NOP_USB_XCEIV=y
-- 
2.34.1