[PATCH v12 2/7] clk: meson: add vclk driver
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Mon Apr 8 02:19:03 PDT 2024
On 05/04/2024 09:00, Jerome Brunet wrote:
>
> On Thu 04 Apr 2024 at 18:59, Neil Armstrong <neil.armstrong at linaro.org> wrote:
>
>> On 04/04/2024 10:13, Jerome Brunet wrote:
>>> On Wed 03 Apr 2024 at 09:46, Neil Armstrong <neil.armstrong at linaro.org>
>>> wrote:
>>>
>>>> The VCLK and VCLK_DIV clocks have supplementary bits.
>>>>
>>>> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
>>>> VCLK sub-tree rate has been set, this is implemented in
>>>> the gate enable callback.
>>>>
>>>> The VCLK_DIV clocks as enable and reset bits used to disable
>>>> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
>>>> the rate is set while the divider is disabled and in reset mode.
>>>>
>>>> The VCLK_DIV enable bit isn't implemented as a gate since it's part
>>>> of the divider logic and vendor does this exact sequence to ensure
>>>> the divider is correctly set.
>>> The checkpatch warning is still there. Is it a choice or a mistake ?
>>> Documentation says "GPL v2" exists for historic reason which seems to
>>> hint "GPL" is preferred, and I suppose this is why checkpatch warns for
>>> it.
>>
>> Well I didn't see this warning, this is what I fixed:
>>
>> $ scripts/checkpatch.pl --strict drivers/clk/meson/vclk.c
>> CHECK: Alignment should match open parenthesis
>> #63: FILE: drivers/clk/meson/vclk.c:63:
>> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
>> + unsigned long prate)
>>
>> CHECK: Alignment should match open parenthesis
>> #73: FILE: drivers/clk/meson/vclk.c:73:
>> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
>> + struct clk_rate_request *req)
>>
>> CHECK: Alignment should match open parenthesis
>> #83: FILE: drivers/clk/meson/vclk.c:83:
>> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>>
>
> I would not ask a respin solely for this. It's nice to fix it but I was
> mostly after the warning TBH.
>
>> <snip>
>>
>> It seems that checking a commit triggers an extra check....
>>
>> $ scripts/checkpatch.pl --strict -G 1bac9f6aa3c3
>> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
>> #58:
>> new file mode 100644
>>
>> <snip>
>>
>> WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
>> #203: FILE: drivers/clk/meson/vclk.c:141:
>> +MODULE_LICENSE("GPL v2");
>
> Hum, I'm running checkpatch against the mail itself, not the commit. I
> still get the warning
Patch or commit seems to trigger more tests than a file directly, anyway I sent a follow-up patch:
https://lore.kernel.org/all/20240408-amlogic-v6-9-upstream-fix-clk-module-license-v1-1-366ddc0f3db9@linaro.org/
Thanks,
Neil
>
>>
>> <snip>
>>
>> Neil
>>
>>>
>>>>
>>>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>>>> ---
>>>> drivers/clk/meson/Kconfig | 4 ++
>>>> drivers/clk/meson/Makefile | 1 +
>>>> drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
>>>> drivers/clk/meson/vclk.h | 51 ++++++++++++++++
>>>> 4 files changed, 197 insertions(+)
>>>>
>>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>>> index 29ffd14d267b..8a9823789fa3 100644
>>>> --- a/drivers/clk/meson/Kconfig
>>>> +++ b/drivers/clk/meson/Kconfig
>>>> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
>>>> tristate
>>>> select COMMON_CLK_MESON_REGMAP
>>>> +config COMMON_CLK_MESON_VCLK
>>>> + tristate
>>>> + select COMMON_CLK_MESON_REGMAP
>>>> +
>>>> config COMMON_CLK_MESON_CLKC_UTILS
>>>> tristate
>>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>>> index 9ee4b954c896..9ba43fe7a07a 100644
>>>> --- a/drivers/clk/meson/Makefile
>>>> +++ b/drivers/clk/meson/Makefile
>>>> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
>>>> obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
>>>> obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
>>>> obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
>>>> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>>>> # Amlogic Clock controllers
>>>> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
>>>> new file mode 100644
>>>> index 000000000000..45dc216941ea
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/vclk.c
>>>> @@ -0,0 +1,141 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>> +/*
>>>> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong at linaro.org>
>>>> + */
>>>> +
>>>> +#include <linux/module.h>
>>>> +#include "vclk.h"
>>>> +
>>>> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
>>>> +
>>>> +static inline struct meson_vclk_gate_data *
>>>> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
>>>> +{
>>>> + return (struct meson_vclk_gate_data *)clk->data;
>>>> +}
>>>> +
>>>> +static int meson_vclk_gate_enable(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>>> +
>>>> + meson_parm_write(clk->map, &vclk->enable, 1);
>>>> +
>>>> + /* Do a reset pulse */
>>>> + meson_parm_write(clk->map, &vclk->reset, 1);
>>>> + meson_parm_write(clk->map, &vclk->reset, 0);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void meson_vclk_gate_disable(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>>> +
>>>> + meson_parm_write(clk->map, &vclk->enable, 0);
>>>> +}
>>>> +
>>>> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>>> +
>>>> + return meson_parm_read(clk->map, &vclk->enable);
>>>> +}
>>>> +
>>>> +const struct clk_ops meson_vclk_gate_ops = {
>>>> + .enable = meson_vclk_gate_enable,
>>>> + .disable = meson_vclk_gate_disable,
>>>> + .is_enabled = meson_vclk_gate_is_enabled,
>>>> +};
>>>> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
>>>> +
>>>> +/* The VCLK Divider has supplementary reset & enable bits */
>>>> +
>>>> +static inline struct meson_vclk_div_data *
>>>> +clk_get_meson_vclk_div_data(struct clk_regmap *clk)
>>>> +{
>>>> + return (struct meson_vclk_div_data *)clk->data;
>>>> +}
>>>> +
>>>> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
>>>> + unsigned long prate)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> +
>>>> + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
>>>> + vclk->table, vclk->flags, vclk->div.width);
>>>> +}
>>>> +
>>>> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
>>>> + struct clk_rate_request *req)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> +
>>>> + return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
>>>> + vclk->flags);
>>>> +}
>>>> +
>>>> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>>>> + unsigned long parent_rate)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> + int ret;
>>>> +
>>>> + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
>>>> + vclk->flags);
>>>> + if (ret < 0)
>>>> + return ret;
>>>> +
>>>> + meson_parm_write(clk->map, &vclk->div, ret);
>>>> +
>>>> + return 0;
>>>> +};
>>>> +
>>>> +static int meson_vclk_div_enable(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> +
>>>> + /* Unreset the divider when ungating */
>>>> + meson_parm_write(clk->map, &vclk->reset, 0);
>>>> + meson_parm_write(clk->map, &vclk->enable, 1);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void meson_vclk_div_disable(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> +
>>>> + /* Reset the divider when gating */
>>>> + meson_parm_write(clk->map, &vclk->enable, 0);
>>>> + meson_parm_write(clk->map, &vclk->reset, 1);
>>>> +}
>>>> +
>>>> +static int meson_vclk_div_is_enabled(struct clk_hw *hw)
>>>> +{
>>>> + struct clk_regmap *clk = to_clk_regmap(hw);
>>>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>>> +
>>>> + return meson_parm_read(clk->map, &vclk->enable);
>>>> +}
>>>> +
>>>> +const struct clk_ops meson_vclk_div_ops = {
>>>> + .recalc_rate = meson_vclk_div_recalc_rate,
>>>> + .determine_rate = meson_vclk_div_determine_rate,
>>>> + .set_rate = meson_vclk_div_set_rate,
>>>> + .enable = meson_vclk_div_enable,
>>>> + .disable = meson_vclk_div_disable,
>>>> + .is_enabled = meson_vclk_div_is_enabled,
>>>> +};
>>>> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
>>>> +
>>>> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
>>>> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong at linaro.org>");
>>>> +MODULE_LICENSE("GPL v2");
>>>> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
>>>> new file mode 100644
>>>> index 000000000000..20b0b181db09
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/vclk.h
>>>> @@ -0,0 +1,51 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>> +/*
>>>> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong at linaro.org>
>>>> + */
>>>> +
>>>> +#ifndef __VCLK_H
>>>> +#define __VCLK_H
>>>> +
>>>> +#include "clk-regmap.h"
>>>> +#include "parm.h"
>>>> +
>>>> +/**
>>>> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
>>>> + *
>>>> + * @enable: vclk enable field
>>>> + * @reset: vclk reset field
>>>> + * @flags: hardware-specific flags
>>>> + *
>>>> + * Flags:
>>>> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
>>>> + */
>>>> +struct meson_vclk_gate_data {
>>>> + struct parm enable;
>>>> + struct parm reset;
>>>> + u8 flags;
>>>> +};
>>>> +
>>>> +extern const struct clk_ops meson_vclk_gate_ops;
>>>> +
>>>> +/**
>>>> + * struct meson_vclk_div_data - vclk_div regmap back specific data
>>>> + *
>>>> + * @div: divider field
>>>> + * @enable: vclk divider enable field
>>>> + * @reset: vclk divider reset field
>>>> + * @table: array of value/divider pairs, last entry should have div = 0
>>>> + *
>>>> + * Flags:
>>>> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
>>>> + */
>>>> +struct meson_vclk_div_data {
>>>> + struct parm div;
>>>> + struct parm enable;
>>>> + struct parm reset;
>>>> + const struct clk_div_table *table;
>>>> + u8 flags;
>>>> +};
>>>> +
>>>> +extern const struct clk_ops meson_vclk_div_ops;
>>>> +
>>>> +#endif /* __VCLK_H */
>>>
>
>
More information about the linux-arm-kernel
mailing list