[PATCH] ASoC: dt-bindings: imx-audio-spdif: convert to YAML

[Shengjiu Wang]

Convert the imx-audio-spdif binding to YAML.

When testing dtbs_check, found below compatible strings
are not listed in document:

fsl,imx-sabreauto-spdif
fsl,imx6sx-sdb-spdif

So add them in yaml file to pass the test.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
---
 .../bindings/sound/imx-audio-spdif.txt        | 36 -----------
 .../bindings/sound/imx-audio-spdif.yaml       | 62 +++++++++++++++++++
 2 files changed, 62 insertions(+), 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
 create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml

diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
deleted file mode 100644
index da84a442ccea..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Freescale i.MX audio complex with S/PDIF transceiver
-
-Required properties:
-
-  - compatible		: "fsl,imx-audio-spdif"
-
-  - model		: The user-visible name of this sound complex
-
-  - spdif-controller	: The phandle of the i.MX S/PDIF controller
-
-
-Optional properties:
-
-  - spdif-out		: This is a boolean property. If present, the
-			  transmitting function of S/PDIF will be enabled,
-			  indicating there's a physical S/PDIF out connector
-			  or jack on the board or it's connecting to some
-			  other IP block, such as an HDMI encoder or
-			  display-controller.
-
-  - spdif-in		: This is a boolean property. If present, the receiving
-			  function of S/PDIF will be enabled, indicating there
-			  is a physical S/PDIF in connector/jack on the board.
-
-* Note: At least one of these two properties should be set in the DT binding.
-
-
-Example:
-
-sound-spdif {
-	compatible = "fsl,imx-audio-spdif";
-	model = "imx-spdif";
-	spdif-controller = <&spdif>;
-	spdif-out;
-	spdif-in;
-};
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml
new file mode 100644
index 000000000000..b29e024f553f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX audio complex with S/PDIF transceiver
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang at nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx-audio-spdif
+          - enum:
+              - fsl,imx-sabreauto-spdif
+              - fsl,imx6sx-sdb-spdif
+      - items:
+          - enum:
+              - fsl,imx-audio-spdif
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  spdif-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the i.MX S/PDIF controller
+
+  spdif-out:
+    type: boolean
+    description: |
+      If present, the transmitting function of S/PDIF will be enabled,
+      indicating there's a physical S/PDIF out connector or jack on the
+      board or it's connecting to some other IP block, such as an HDMI
+      encoder or display-controller.
+
+  spdif-in:
+    type: boolean
+    description: |
+      If present, the receiving function of S/PDIF will be enabled,
+      indicating there is a physical S/PDIF in connector/jack on the board.
+
+required:
+  - compatible
+  - model
+  - spdif-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    sound-spdif {
+        compatible = "fsl,imx-audio-spdif";
+        model = "imx-spdif";
+        spdif-controller = <&spdif>;
+        spdif-out;
+        spdif-in;
+    };
-- 
2.34.1