[PATCH 3/4] arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1

[Krzysztof Kozlowski]

There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream.  This property looks
like some real hardware, just described wrongly.  Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.

This fixes dtbs_check warning:

  rk3566-lubancat-1.dtb: pcie at fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 6ecdf5d28339..c1194d1e438d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -447,7 +447,6 @@ rgmii_phy1: phy at 0 {
 
 &pcie2x1 {
 	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
-- 
2.34.1