[PATCH v3 11/25] media: i2c: imx258: Add get_selection for pixel array information

[Luis Garcia]

On 4/3/24 12:46, Pavel Machek wrote:
> Hi!
> 
>> Libcamera requires the cropping information for each mode, so
>> add this information to the driver.
> 
>> @@ -116,6 +124,9 @@ struct imx258_mode {
>>  	u32 link_freq_index;
>>  	/* Default register values */
>>  	struct imx258_reg_list reg_list;
>> +
>> +	/* Analog crop rectangle. */
> 
> No need for "." at the end, as it is not above.
> 

Done

>> +	struct v4l2_rect crop;
>>  };
> 
> If the crop is same in all modes, should we have it in common place?
> 
> Best regards,
> 								Pavel

I see the imx219 made a similar change where it was changed from using
that .crop format to just setting it in the set_pad_format function
so we can do something similar here.