[PATCH v1 1/1] phy: freescale: imx8m-pcie: fix pcie link-up instability

[Vinod Koul]

On 22-03-24, 14:06, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> Leaving AUX_PLL_REFCLK_SEL at its reset default of AUX_IN (PLL clock)
> proves to be more stable on the i.MX 8M Mini.
> 
> Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
> 

Please dont keep an empty line b/w Fixes and s-o-b line...

> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> ---
> 
>  drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> index b700f52b7b67..11fcb1867118 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> @@ -110,8 +110,10 @@ static int imx8_pcie_phy_power_on(struct phy *phy)
>  		/* Source clock from SoC internal PLL */
>  		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL,
>  		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062);
> -		writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
> -		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
> +		if (imx8_phy->drvdata->variant != IMX8MM) {
> +			writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
> +			       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
> +		}
>  		val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM;
>  		writel(val | ANA_AUX_RX_TERM_GND_EN,
>  		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064);
> --
> 2.44.0
> 
> 
> -- 
> linux-phy mailing list
> linux-phy at lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy

-- 
~Vinod