[PATCH v1 13/49] ARM: dts: imx6qdl-cubox-i: Use #pwm-cells = <3> for imx27-pwm device
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Fri Apr 5 14:42:00 PDT 2024
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
index 1e530d892b76..761566ae3cf5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -64,7 +64,7 @@ led-1 {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
};
};
@@ -233,7 +233,6 @@ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
--
2.43.0
More information about the linux-arm-kernel
mailing list