[PATCH v1 11/49] ARM: dts: imx6qdl-apf6dev: Use #pwm-cells = <3> for imx27-pwm devices

[Uwe Kleine-König]

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warnings:

	arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dtb: pwm at 2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
	arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dtb: pwm at 2088000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
index 338d292553ad..3a46ade3b6bd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -13,7 +13,7 @@ chosen {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <0>;
 		power-supply = <&reg_5v>;
@@ -212,7 +212,6 @@ &pcie {
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
-- 
2.43.0