[PATCH v1 01/49] ARM: dts: imx51-ts4800: Use #pwm-cells = <3> for imx27-pwm device

[Uwe Kleine-König]

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx51-ts4800.dtb: pwm at 73fb4000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
index f7408722d68a..2bd0761c7e90 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
@@ -45,7 +45,7 @@ backlight_reg: regulator-backlight {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
+		pwms = <&pwm1 0 78770 0>;
 		brightness-levels = <0 150 200 255>;
 		default-brightness-level = <1>;
 		power-supply = <&backlight_reg>;
@@ -113,7 +113,6 @@ &ipu_di0_disp1 {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
-- 
2.43.0