[PATCH v2 0/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards

Josua Mayer josua at solid-run.com
Thu Apr 4 08:35:04 PDT 2024


SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388
SoM used in Clearfog and Clearfog Pro boards.

1. Add new binding for compatible strings closely matching the original.

2. Add device-tree includes for SoM and carrier shared design.

3. Add device-tree for both Clearfog Base and Pro.

While dtbs_check is happy with LED descriptions behind dsa switch,
functionally they require supporting code by Andrew Lunn:
https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@lunn.ch

NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
CN9130 SoM has a different footprint from Armada 388 SoM.
Components on the carrier board below the SoM may collide causing
damage, such as on Clearfog Base.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
Changes in v2:
- rewrote dt bindings dropping unnecessary compatibles
  (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>)
- added bindings for two additional boards (cn9131/9132)
  support planned for the coming weeks, mostly serves
  illustrational purposes, to understand cn913x variants
- cf-pro: add description for LEDs behind DSA switch
- cf-base: add description for LEDs behind PHYs
  (Reported-By: Andrew Lunn <andrew at lunn.ch>)
- Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@solid-run.com

---
Josua Mayer (3):
      dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
      dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
      arm64: dts: add description for solidrun cn9130 som and clearfog boards

 .../bindings/arm/marvell/armada-7k-8k.yaml         |  18 +
 arch/arm64/boot/dts/marvell/Makefile               |   2 +
 arch/arm64/boot/dts/marvell/cn9130-cf-base.dts     | 178 ++++++++++
 arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts      | 367 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9130-cf.dtsi         | 193 +++++++++++
 arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi     | 159 +++++++++
 6 files changed, 917 insertions(+)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240318-cn9130-som-848e86acb0ac

Sincerely,
-- 
Josua Mayer <josua at solid-run.com>




More information about the linux-arm-kernel mailing list