[PATCH v2] arm64: dts: ti: k3-am62p: use eFuse MAC Address for CPSW3G Port 1
Siddharth Vadapalli
s-vadapalli at ti.com
Thu Apr 4 03:43:46 PDT 2024
On Thu, Apr 04, 2024 at 12:31:47PM +0200, Krzysztof Kozlowski wrote:
> On 04/04/2024 12:16, Siddharth Vadapalli wrote:
> >>> I was following the convention that other mfd-syscon compatible nodes
> >>> seemed to be using:
> >>> https://github.com/torvalds/linux/blob/41bccc98fb7931d63d03f326a746ac4d429c1dd3/arch/arm64/boot/dts/ti/k3-am65-main.dtsi#L502
> >>> The node is:
> >>> dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0
> >>> corresponding to the compatible:
> >>> "ti,am654-dss-oldi-io-ctrl"
> >>> which was added by commit:
> >>> https://github.com/torvalds/linux/commit/cb523495ee2a5938fbdd30b8a35094d386c55c12
> >>
> >> So if that one was wrong, then what? I don't know really what type of
> >> device is it, but just because one contributor called it that way, does
> >> not mean you should keep going. Maybe investigate why that contributor
> >> did not decide to follow Devicetree spec recommendation?
> >
> > Yes, it doesn't justify the convention. I seem to have picked a wrong
> > example when figuring out the convention for naming the node. I plan to
> > name it as:
> > ethernet-mac-efuse
> > while retaining the label "cpsw_mac_efuse" since CPSW is the name of the
> > Ethernet Switch on the SoC. Please let me know if it is acceptable. I
> > will post the v3 patch based on your feedback.
>
> Label is fine, there is no restriction/guideline on labels, so choose
> descriptive or something useful for you. Just the node name. If this is
> syscon, then usually system-controller. If this is efuse, then maybe
> efuse, even though previously I was looking at this more as a syscon.
I will change it to "ethernet-mac-syscon" to indicate the MMIO nature of
the node. eFuse might give the wrong impression, despite the fact that
the contents of the register are based on the contents of an eFuse.
I will post the v3 patch with the following changes:
1. Rename "cpsw-mac-efuse" as "ethernet-mac-syscon"
2. Rename "cpsw_mac_efuse" as "cpsw_mac_syscon"
Regards,
Siddharth.
More information about the linux-arm-kernel
mailing list