[PATCH net-next v11 10/13] net: ethtool: pse-pd: Target the command to the requested PHY

Maxime Chevallier maxime.chevallier at bootlin.com
Thu Apr 4 02:30:00 PDT 2024


PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
---
V11: No changes
V10: No changes
V9: No changes
V8: No changes
V7: No changes
V6: Use dedicated policy
V5: Added-back an incorrectly removed check
V4: No changes
V3: No changes
V2: New patch


 net/ethtool/pse-pd.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index cc478af77111..be50d79122c4 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,15 +28,13 @@ struct pse_reply_data {
 /* PSE_GET */
 
 const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
 	if (!phydev) {
 		NL_SET_ERR_MSG(extack, "No PHY is attached");
 		return -EOPNOTSUPP;
@@ -64,7 +62,7 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	ret = pse_get_pse_attributes(req_base->phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -109,7 +107,7 @@ static int pse_fill_reply(struct sk_buff *skb,
 /* PSE_SET */
 
 const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -124,7 +122,6 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
@@ -132,7 +129,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 	/* this values are already validated by the ethnl_pse_set_policy */
 	config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
 
-	phydev = dev->phydev;
+	phydev = req_info->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
-- 
2.44.0




More information about the linux-arm-kernel mailing list