[PATCH v3 0/2] Add initial ARM MHUv3 mailbox support

[Cristian Marussi]

Hi,

This series adds support for the new ARM Message Handling Unit v3 mailbox
controller [1].

The ARM MHUv3 can optionally support various extensions, enabling the
usage of different transport protocols.

Patch [2/2] adds a platform driver which, as of now, provides support only
for the Doorbell extension using the combined interrupt.

On the other side, bindings in [1/2] are introduced for all the extensions
described by the specification, as long as they are of interest to an
entity running from Normal world, like Linux: as such, Doorbell, FIFO and
FastChannel extensions are documented.

In these regards, note that the ARM MHUv3 controller can optionally
implement a considerable number of interrupts to express a great deal of
events and many of such interrupts are defined as being per-channel: with
the total maximum amount of possibly implemented channels across all
extensions being 1216 (1024+128+64), it would mean *a lot* of
interrupt-names to enumerate in the bindings.

For the sake of simplicity the binding as of now only introduces interrupt
names for a mere 8-channels in the range (0,7) for each per-channel
interrupt type: the idea is to leave open the possibility to add more to
this list of numbered items only when (and if) new real HW appears that
effectively needs more than 8 channels. (like AMBA, where the maximum
number of IRQ was progressively increased when needed, AFAIU).

Based on v6.9-rc1, tested on ARM TCS23 [2]
(TCS23 reference SW stack is still to be made fully publicly available)

Thanks,
Cristian

[1]: https://developer.arm.com/documentation/aes0072/aa/?lang=en
[2]: https://community.arm.com/arm-community-blogs/b/tools-software-ides-blog/posts/total-compute-solutions-platform-software-stack-and-fvp


---
v2 -> v3
 - fixed spurious tabs/spaces in DT binding
v1 -> v2
 - clarified DT bindings extension descriptions around configurability
   and discoverability
 - removed unused labels from the DT example
 - using pattern properties to define DT interrupt-names
 - bumped DT interrupt maxItems to 74 (allowing uo to 8 channels per extension)
 - fixed checkpatch warnings about side-effects on write/read bitfield macros
 - fixed sparse errors as reported
   | Reported-by: kernel test robot <lkp at intel.com>
   | Closes: https://lore.kernel.org/oe-kbuild-all/202403290015.tCLXudqC-lkp@intel.com/

Cristian Marussi (2):
  dt-bindings: mailbox: arm,mhuv3: Add bindings
  mailbox: arm_mhuv3: Add driver

 .../bindings/mailbox/arm,mhuv3.yaml           |  217 ++++
 MAINTAINERS                                   |    9 +
 drivers/mailbox/Kconfig                       |   11 +
 drivers/mailbox/Makefile                      |    2 +
 drivers/mailbox/arm_mhuv3.c                   | 1063 +++++++++++++++++
 5 files changed, 1302 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
 create mode 100644 drivers/mailbox/arm_mhuv3.c

-- 
2.34.1