[PATCH v14 01/18] irqchip/sifive-plic: Convert PLIC driver into a platform driver

[Samuel Holland]

Hi Prabhakar,

On 2024-04-03 10:49 AM, Lad, Prabhakar wrote:
> On Wed, Apr 3, 2024 at 3:17 PM Anup Patel <apatel at ventanamicro.com> wrote:
>>
>> On Wed, Apr 3, 2024 at 2:01 PM Lad, Prabhakar
>> <prabhakar.csengg at gmail.com> wrote:
>>>
>>> Hi Anup,
>>>
>>> On Thu, Feb 22, 2024 at 9:41 AM Anup Patel <apatel at ventanamicro.com> wrote:
>>>>
>>>> The PLIC driver does not require very early initialization so convert
>>>> it into a platform driver.
>>>>
>>>> After conversion, the PLIC driver is probed after CPUs are brought-up
>>>> so setup cpuhp state after context handler of all online CPUs are
>>>> initialized otherwise PLIC driver crashes for platforms with multiple
>>>> PLIC instances.
>>>>
>>>> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
>>>> ---
>>>>  drivers/irqchip/irq-sifive-plic.c | 101 ++++++++++++++++++------------
>>>>  1 file changed, 61 insertions(+), 40 deletions(-)
>>>>
>>> This patch seems to have broken things on RZ/Five SoC, after reverting
>>> this patch I get to boot it back again on v6.9-rc2. Looks like there
>>> is some probe order issue after switching to platform driver?
>>
>> Yes, this is most likely related to probe ordering based on your DT.
>>
>> Can you share the failing boot log and DT ?
> 
> non working case, https://paste.debian.net/1312947/

Looks like you need to add "keep_bootcon" to your kernel command line to get a
full log here.

> after reverting, https://paste.debian.net/1312948/
> (attached is the DTB)

I don't see anything suspicious between the "riscv-intc" lines and the "Fixed
dependency cycle(s)" lines that looks like it would depend on the PLIC IRQ
domain. Maybe there is some driver that does not handle -EPROBE_DEFER? It's hard
to tell without the full log from the failure case.

Regards,
Samuel