[PATCH v8 3/7] spmi: pmic-arb: Fix some compile warnings about members not being described

[Neil Armstrong]

On 02/04/2024 14:07, Abel Vesa wrote:
> Fix the following compile warnings:
> 
>   warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
>   warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
>   warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
>   warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
>   warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'
> 
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
>   drivers/spmi/spmi-pmic-arb.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 9ed1180fe31f..704fd4506971 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -132,6 +132,8 @@ struct apid_data {
>    * @wr_base:		on v1 "core", on v2 "chnls"    register base off DT.
>    * @intr:		address of the SPMI interrupt control registers.
>    * @cnfg:		address of the PMIC Arbiter configuration registers.
> + * @core:		core register base for v2 and above only (see above)
> + * @core_size:		core register base size
>    * @lock:		lock to synchronize accesses.
>    * @channel:		execution environment channel to use for accesses.
>    * @irq:		PMIC ARB interrupt.
> @@ -144,6 +146,7 @@ struct apid_data {
>    * @apid_count:		on v5 and v7: number of APIDs associated with the
>    *			particular SPMI bus instance
>    * @mapping_table:	in-memory copy of PPID -> APID mapping table.
> + * @mapping_table_valid:bitmap containing valid-only periphs
>    * @domain:		irq domain object for PMIC IRQ domain
>    * @spmic:		SPMI controller object
>    * @ver_ops:		version dependent operations.
> @@ -232,6 +235,7 @@ static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb *pmic_arb,
>   
>   /**
>    * pmic_arb_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
> + * @pmic_arb:	the SPMI PMIC arbiter
>    * @bc:		byte count -1. range: 0..3
>    * @reg:	register's address
>    * @buf:	output parameter, length must be bc + 1
> @@ -246,6 +250,7 @@ pmic_arb_read_data(struct spmi_pmic_arb *pmic_arb, u8 *buf, u32 reg, u8 bc)
>   
>   /**
>    * pmic_arb_write_data: write 1..4 bytes from buf to pmic-arb's register
> + * @pmic_arb:	the SPMI PMIC arbiter
>    * @bc:		byte-count -1. range: 0..3.
>    * @reg:	register's address.
>    * @buf:	buffer to write. length must be bc + 1.
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>