[PATCH v3 0/2] media: i2c: Add support for GC05A2 sensor

[Zhi Mao]

This series adds YAML DT binding and V4L2 sub-device driver for Galaxycore's
GC05A2 5-megapixel 10-bit RAW CMOS 1/5" sensor, with an MIPI CSI-2 image data
interface and the I2C control bus.

The driver is implemented with V4L2 framework.
 - Async registered as a V4L2 sub-device.
 - As the first component of camera system including Seninf, ISP pipeline.
 - A media entity that provides one source pad in common.
 - Used in camera features on ChromeOS application.

Also this driver supports following features:
 - manual exposure and analog gain control support
 - vertical blanking control support
 - test pattern support
 - media controller support
 - runtime PM support
 - support resolution: 2592x1944 at 30fps, 1280x720 at 60fps

Previous versions of this patch-set can be found here:
v2:https://lore.kernel.org/linux-media/20240323014751.4989-1-zhi.mao@mediatek.com/
v1:https://lore.kernel.org/linux-media/20240316025253.2300-1-zhi.mao@mediatek.com/
v0:https://lore.kernel.org/linux-media/20240313054409.8073-1-zhi.mao@mediatek.com/

This series is based on linux-next, tag: next-20240402
Changes in v3:
- gc05a2 sensor driver:
-- remove gc05a2_power_on() in function:probe(),
   and use pm_runtime_resume_and_get() to power on sensor in function:start_streaming()
-- move gc05a2_identify_module() frome function:probe() to function:start_streaming()

Thanks

Zhi Mao (2):
  media: dt-bindings: i2c: add GalaxyCore GC05A2 image sensor
  media: i2c: Add GC05A2 image sensor driver

 .../bindings/media/i2c/galaxycore,gc05a2.yaml |  112 ++
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/gc05a2.c                    | 1383 +++++++++++++++++
 4 files changed, 1506 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml
 create mode 100644 drivers/media/i2c/gc05a2.c

-- 
2.25.1