[PATCH 3/3] arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address

[Krzysztof Kozlowski]

On 02/04/2024 21:27, Andrew Lunn wrote:
> On Tue, Apr 02, 2024 at 08:32:40PM +0200, Krzysztof Kozlowski wrote:
>> The Espressobin Ultra DTS includes Espressobin DTSI which defines
>> ethernet-switch at 1 node.  The Ultra DTS overrides "reg" to 3, but that
>> leaves still old unit address which conflicts with the new phy at 1 node
>> (W=1 dtc warning):
>>
>>   armada-3720-espressobin.dtsi:148.29-203.4: Warning (unique_unit_address_if_enabled): /soc/internal-regs at d0000000/mdio at 32004/ethernet-switch at 1: duplicate unit-address (also used in node /soc/internal-regs at d0000000/mdio at 32004/ethernet-phy at 1)
>>
>> Fix this by deleting ethernet-switch at 1 node and merging original node
>> with code from Ultra DTS into new ethernet-switch at 3.
> 
> That is a bit ugly, having the exact same code twice.
> 
> Could the bulk of the switch node be put into a .dtsi file, and then
> included as needed

There are several overrides/new nodes in espresso ultra, so this is not
the same code.

> 
> &mdio {
>         switch0: ethernet-switch at 1 {
> 		reg = <1>;        
> 		include "armada-3720-espressobin-switch.dtsi"

And this DTSI would be with what? No device node? That's not readable.

> 
>         }
> }
Best regards,
Krzysztof