[PATCH 2/5] arm64: dts: amazon: alpine-v2: move non-MMIO node out of soc

[Krzysztof Kozlowski]

Non-MMIO devices should not be within simple-bus, as reported by dtc W=1
warning:

  alpine-v2.dtsi:100.9-106.5: Warning (simple_bus_reg): /soc/timer: missing or empty reg/ranges property
  alpine-v2.dtsi:108.7-114.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm64/boot/dts/amazon/alpine-v2.dtsi | 33 ++++++++++++-----------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index 32b6ac8a5352..5b6b58dd44cb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -39,6 +39,7 @@
 / {
 	model = "Annapurna Labs Alpine v2";
 	compatible = "al,alpine-v2";
+	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
@@ -89,6 +90,22 @@ sbclk: sbclk {
 		clock-frequency = <1000000>;
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -97,22 +114,6 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges;
 
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		pmu {
-			compatible = "arm,armv8-pmuv3";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		gic: interrupt-controller at f0200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
-- 
2.34.1