[PATCH v1 0/4] arm64: dts: freescale: Add Toradex Colibri iMX8DX

[Hiago De Franco]

From: Hiago De Franco <hiago.franco at toradex.com>

This patch series introduces support for Colibri iMX8DX SoM and its
carrier boards, where the board can be mated with: Aster, Evaluation Board
v3, Iris v2, and Iris v1. This SoM is a variant of the already supported
Colibri iMX8QXP, utilizing an NXP i.MX8DX SoC instead of i.MX8QXP.
Therefore, this patch series also adds support for the i.MX8DX processor.

Hiago De Franco (4):
  arm64: dts: freescale: Add i.MX8DX dtsi
  dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8x
  dt-bindings: arm: fsl: Add Colibri iMX8DX
  arm64: dts: freescale: Add Toradex Colibri iMX8DX

 Documentation/devicetree/bindings/arm/fsl.yaml   |  7 ++++---
 arch/arm64/boot/dts/freescale/Makefile           |  4 ++++
 .../boot/dts/freescale/imx8dx-colibri-aster.dts  | 16 ++++++++++++++++
 .../dts/freescale/imx8dx-colibri-eval-v3.dts     | 16 ++++++++++++++++
 .../dts/freescale/imx8dx-colibri-iris-v2.dts     | 16 ++++++++++++++++
 .../boot/dts/freescale/imx8dx-colibri-iris.dts   | 16 ++++++++++++++++
 .../arm64/boot/dts/freescale/imx8dx-colibri.dtsi | 11 +++++++++++
 arch/arm64/boot/dts/freescale/imx8dx.dtsi        | 13 +++++++++++++
 8 files changed, 96 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx-colibri-iris-v2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx-colibri-iris.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dx.dtsi

-- 
2.39.2