[PATCH v7 6/6] spmi: pmic-arb: Add multi bus support

Abel Vesa abel.vesa at linaro.org
Tue Apr 2 01:50:27 PDT 2024


On 24-04-02 10:25:52, Neil Armstrong wrote:
> Hi Abel,
> 
> On 29/03/2024 19:54, Abel Vesa wrote:
> > Starting with HW version 7, there are actually two separate buses
> > (with two separate sets of wires). So add support for the second bus.
> > The first platform that needs this support for the second bus is the
> > Qualcomm X1 Elite, so add the compatible for it as well.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> > ---
> >   drivers/spmi/spmi-pmic-arb.c | 138 +++++++++++++++++++++++++++++++++++++------
> >   1 file changed, 120 insertions(+), 18 deletions(-)
> > 
> > diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> > index 19ff8665f3d9..56f2b3190d82 100644
> > --- a/drivers/spmi/spmi-pmic-arb.c
> > +++ b/drivers/spmi/spmi-pmic-arb.c
> > @@ -13,6 +13,7 @@
> >   #include <linux/kernel.h>
> >   #include <linux/module.h>
> >   #include <linux/of.h>
> > +#include <linux/of_address.h>
> >   #include <linux/of_irq.h>
> >   #include <linux/platform_device.h>
> >   #include <linux/slab.h>
> > @@ -95,6 +96,8 @@ enum pmic_arb_channel {
> >   	PMIC_ARB_CHANNEL_OBS,
> >   };
> > +#define PMIC_ARB_MAX_BUSES		2
> > +
> >   /* Maximum number of support PMIC peripherals */
> >   #define PMIC_ARB_MAX_PERIPHS		512
> >   #define PMIC_ARB_MAX_PERIPHS_V7		1024
> > @@ -148,6 +151,7 @@ struct spmi_pmic_arb;
> >    * @min_apid:		minimum APID (used for bounding IRQ search)
> >    * @max_apid:		maximum APID
> >    * @irq:		PMIC ARB interrupt.
> > + * @id:			unique ID of the bus
> >    */
> >   struct spmi_pmic_arb_bus {
> >   	struct spmi_pmic_arb	*pmic_arb;
> > @@ -165,6 +169,7 @@ struct spmi_pmic_arb_bus {
> >   	u16			min_apid;
> >   	u16			max_apid;
> >   	int			irq;
> > +	u8			id;
> >   };
> >   /**
> > @@ -179,7 +184,8 @@ struct spmi_pmic_arb_bus {
> >    * @ee:			the current Execution Environment
> >    * @ver_ops:		version dependent operations.
> >    * @max_periphs:	Number of elements in apid_data[]
> > - * @bus:		per arbiter bus instance
> > + * @buses:		per arbiter buses instances
> > + * @buses_available:	number of buses registered
> >    */
> >   struct spmi_pmic_arb {
> >   	void __iomem		*rd_base;
> > @@ -191,7 +197,8 @@ struct spmi_pmic_arb {
> >   	u8			ee;
> >   	const struct pmic_arb_ver_ops *ver_ops;
> >   	int			max_periphs;
> > -	struct spmi_pmic_arb_bus *bus;
> > +	struct spmi_pmic_arb_bus *buses[PMIC_ARB_MAX_BUSES];
> > +	int			buses_available;
> >   };
> >   /**
> > @@ -219,7 +226,7 @@ struct spmi_pmic_arb {
> >   struct pmic_arb_ver_ops {
> >   	const char *ver_str;
> >   	int (*get_core_resources)(struct platform_device *pdev, void __iomem *core);
> > -	int (*init_apid)(struct spmi_pmic_arb_bus *bus);
> > +	int (*init_apid)(struct spmi_pmic_arb_bus *bus, int index);
> >   	int (*ppid_to_apid)(struct spmi_pmic_arb_bus *bus, u16 ppid);
> >   	/* spmi commands (read_cmd, write_cmd, cmd) functionality */
> >   	int (*offset)(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> > @@ -308,8 +315,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> >   			}
> >   			if (status & PMIC_ARB_STATUS_FAILURE) {
> > -				dev_err(&ctrl->dev, "%s: %#x %#x: transaction failed (%#x)\n",
> > -					__func__, sid, addr, status);
> > +				dev_err(&ctrl->dev, "%s: %#x %#x: transaction failed (%#x) reg: 0x%x\n",
> > +					__func__, sid, addr, status, offset);
> >   				WARN_ON(1);
> >   				return -EIO;
> >   			}
> > @@ -325,8 +332,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> >   		udelay(1);
> >   	}
> > -	dev_err(&ctrl->dev, "%s: %#x %#x: timeout, status %#x\n",
> > -		__func__, sid, addr, status);
> > +	dev_err(&ctrl->dev, "%s: %#x %#x %#x: timeout, status %#x\n",
> > +		__func__, bus->id, sid, addr, status);
> >   	return -ETIMEDOUT;
> >   }
> > @@ -1005,11 +1012,17 @@ static int pmic_arb_get_core_resources_v1(struct platform_device *pdev,
> >   	return 0;
> >   }
> > -static int pmic_arb_init_apid_v1(struct spmi_pmic_arb_bus *bus)
> > +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb_bus *bus, int index)
> >   {
> >   	struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> >   	u32 *mapping_table;
> > +	if (index) {
> > +		dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> > +			index);
> > +		return -EINVAL;
> > +	}
> 
> Shouldn't be here
> 

You're right. Since the DT bindings for HW < v7 doesn't allow multi bus
support, this check is not needed. Will drop.

> > +
> >   	mapping_table = devm_kcalloc(&bus->spmic->dev, pmic_arb->max_periphs,
> >   				     sizeof(*mapping_table), GFP_KERNEL);
> >   	if (!mapping_table)
> > @@ -1252,11 +1265,17 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> >   	return 0x1000 * pmic_arb->ee + 0x8000 * apid;
> >   }
> > -static int pmic_arb_init_apid_v5(struct spmi_pmic_arb_bus *bus)
> > +static int pmic_arb_init_apid_v5(struct spmi_pmic_arb_bus *bus, int index)
> >   {
> >   	struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> >   	int ret;
> > +	if (index) {
> > +		dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> > +			index);
> > +		return -EINVAL;
> > +	}
> 
> Shouldn't be here
> 

Ditto.

> > +
> >   	bus->base_apid = 0;
> >   	bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> >   					   PMIC_ARB_FEATURES_PERIPH_MASK;
> > @@ -1328,6 +1347,50 @@ static int pmic_arb_get_core_resources_v7(struct platform_device *pdev,
> >   	return pmic_arb_get_obsrvr_chnls_v2(pdev);
> >   }
> > +/*
> > + * Only v7 supports 2 buses. Each bus will get a different apid count, read
> > + * from different registers.
> > + */
> > +static int pmic_arb_init_apid_v7(struct spmi_pmic_arb_bus *bus, int index)
> > +{
> > +	struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> > +	int ret;
> > +
> > +	if (index == 0) {
> > +		bus->base_apid = 0;
> > +		bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> > +						   PMIC_ARB_FEATURES_PERIPH_MASK;
> > +	} else if (index == 1) {
> > +		bus->base_apid = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> > +						  PMIC_ARB_FEATURES_PERIPH_MASK;
> > +		bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES1) &
> > +						   PMIC_ARB_FEATURES_PERIPH_MASK;
> > +	} else {
> > +		dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> > +			bus->id);
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (bus->base_apid + bus->apid_count > pmic_arb->max_periphs) {
> > +		dev_err(&bus->spmic->dev, "Unsupported APID count %d detected\n",
> > +			bus->base_apid + bus->apid_count);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = pmic_arb_init_apid_min_max(bus);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = pmic_arb_read_apid_map_v5(bus);
> > +	if (ret) {
> > +		dev_err(&bus->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n",
> > +			ret);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> 
> Shouldn't be here
> 

Since the apid base and count are different between buses and since v7
supports 2 buses, we need a v7 specific init_apid. So this one is
needed.

> > +
> >   /*
> >    * v7 offset per ee and per apid for observer channels and per apid for
> >    * read/write channels.
> > @@ -1580,7 +1643,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v5 = {
> >   static const struct pmic_arb_ver_ops pmic_arb_v7 = {
> >   	.ver_str		= "v7",
> >   	.get_core_resources	= pmic_arb_get_core_resources_v7,
> > -	.init_apid		= pmic_arb_init_apid_v5,
> > +	.init_apid		= pmic_arb_init_apid_v7,
> 
> Shouldn't be here
> 

See above.

> >   	.ppid_to_apid		= pmic_arb_ppid_to_apid_v5,
> >   	.non_data_cmd		= pmic_arb_non_data_cmd_v2,
> >   	.offset			= pmic_arb_offset_v7,
> > @@ -1604,6 +1667,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> >   				  struct device_node *node,
> >   				  struct spmi_pmic_arb *pmic_arb)
> >   {
> > +	int bus_index = pmic_arb->buses_available;
> >   	struct spmi_pmic_arb_bus *bus;
> >   	struct device *dev = &pdev->dev;
> >   	struct spmi_controller *ctrl;
> > @@ -1622,7 +1686,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> >   	bus = spmi_controller_get_drvdata(ctrl);
> > -	pmic_arb->bus = bus;
> > +	pmic_arb->buses[bus_index] = bus;
> >   	bus->ppid_to_apid = devm_kcalloc(dev, PMIC_ARB_MAX_PPID,
> >   					 sizeof(*bus->ppid_to_apid),
> > @@ -1665,12 +1729,13 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> >   	bus->cnfg = cnfg;
> >   	bus->irq = irq;
> >   	bus->spmic = ctrl;
> > +	bus->id = bus_index;
> > -	ret = pmic_arb->ver_ops->init_apid(bus);
> > +	ret = pmic_arb->ver_ops->init_apid(bus, bus_index);
> >   	if (ret)
> >   		return ret;
> > -	dev_dbg(&pdev->dev, "adding irq domain\n");
> > +	dev_dbg(&pdev->dev, "adding irq domain for bus %d\n", bus_index);
> >   	bus->domain = irq_domain_add_tree(dev->of_node,
> >   					  &pmic_arb_irq_domain_ops, bus);
> > @@ -1683,14 +1748,53 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> >   					 pmic_arb_chained_irq, bus);
> >   	ctrl->dev.of_node = node;
> > +	dev_set_name(&ctrl->dev, "spmi-%d", bus_index);
> >   	ret = devm_spmi_controller_add(dev, ctrl);
> >   	if (ret)
> >   		return ret;
> > +	pmic_arb->buses_available++;
> > +
> >   	return 0;
> >   }
> > +static int spmi_pmic_arb_register_buses(struct spmi_pmic_arb *pmic_arb,
> > +					struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *node = dev->of_node;
> > +	struct device_node *child;
> > +	int ret;
> > +
> > +	/* legacy mode doesn't provide child node for the bus */
> > +	if (of_device_is_compatible(node, "qcom,spmi-pmic-arb"))
> > +		return spmi_pmic_arb_bus_init(pdev, node, pmic_arb);
> > +
> > +	for_each_available_child_of_node(node, child) {
> > +		if (of_node_name_eq(child, "spmi")) {
> > +			ret = spmi_pmic_arb_bus_init(pdev, child, pmic_arb);
> > +			if (ret)
> > +				return ret;
> > +		}
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static void spmi_pmic_arb_deregister_buses(struct spmi_pmic_arb *pmic_arb)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < PMIC_ARB_MAX_BUSES; i++) {
> > +		struct spmi_pmic_arb_bus *bus = pmic_arb->buses[i];
> > +
> > +		irq_set_chained_handler_and_data(bus->irq,
> > +						 NULL, NULL);
> > +		irq_domain_remove(bus->domain);
> > +	}
> > +}
> > +
> >   static int spmi_pmic_arb_probe(struct platform_device *pdev)
> >   {
> >   	struct spmi_pmic_arb *pmic_arb;
> > @@ -1761,21 +1865,19 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
> >   	pmic_arb->ee = ee;
> > -	return spmi_pmic_arb_bus_init(pdev, dev->of_node, pmic_arb);
> > +	return spmi_pmic_arb_register_buses(pmic_arb, pdev);
> >   }
> >   static void spmi_pmic_arb_remove(struct platform_device *pdev)
> >   {
> >   	struct spmi_pmic_arb *pmic_arb = platform_get_drvdata(pdev);
> > -	struct spmi_pmic_arb_bus *bus = pmic_arb->bus;
> > -	irq_set_chained_handler_and_data(bus->irq,
> > -					 NULL, NULL);
> > -	irq_domain_remove(bus->domain);
> > +	spmi_pmic_arb_deregister_buses(pmic_arb);
> >   }
> >   static const struct of_device_id spmi_pmic_arb_match_table[] = {
> >   	{ .compatible = "qcom,spmi-pmic-arb", },
> > +	{ .compatible = "qcom,x1e80100-spmi-pmic-arb", },
> >   	{},
> >   };
> >   MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
> > 
> 
> With issues fixed, it looks fine.
> 
> Thanks,
> Neil



More information about the linux-arm-kernel mailing list