[PATCH v2 3/3] phy: freescale: imx8q-hsio: Add i.MX8Q HSIO PHY driver support
Richard Zhu
hongxing.zhu at nxp.com
Mon Apr 1 22:45:04 PDT 2024
Add i.MX8Q HSIO PHY driver support.
- Add one HSIO configuration property, that used to select the
"PCIE_AB_SELECT" and "PHY_X1_EPCS_SEL" during the initialization.
Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
drivers/phy/freescale/Kconfig | 8 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-imx8q-hsio.c | 518 +++++++++++++++++++++
3 files changed, 527 insertions(+)
create mode 100644 drivers/phy/freescale/phy-fsl-imx8q-hsio.c
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c06..bcddddef1cbb 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,14 @@ config PHY_FSL_IMX8M_PCIE
Enable this to add support for the PCIE PHY as found on
i.MX8M family of SOCs.
+config PHY_FSL_IMX8Q_HSIO
+ tristate "Freescale i.MX8Q HSIO PHY"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to add support for the HSIO PHY as found on
+ i.MX8Q family of SOCs.
+
endif
config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4d2..db888c37fcf9 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
+obj-$(CONFIG_PHY_FSL_IMX8Q_HSIO) += phy-fsl-imx8q-hsio.o
obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8q-hsio.c b/drivers/phy/freescale/phy-fsl-imx8q-hsio.c
new file mode 100644
index 000000000000..14fc925c4f57
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8q-hsio.c
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pci_regs.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#define MAX_NUM_LANES 3
+#define LANE_NUM_CLKS 5
+
+/* Parameters for the waiting for PCIe PHY PLL to lock */
+#define PHY_INIT_WAIT_USLEEP_MAX 10
+#define PHY_INIT_WAIT_TIMEOUT (1000 * PHY_INIT_WAIT_USLEEP_MAX)
+
+/* i.MX8Q HSIO registers */
+#define CTRL0 0x0
+#define APB_RSTN_0 BIT(0)
+#define APB_RSTN_1 BIT(1)
+#define PIPE_RSTN_0_MASK GENMASK(25, 24)
+#define PIPE_RSTN_1_MASK GENMASK(27, 26)
+#define MODE_MASK GENMASK(20, 17)
+#define MODE_PCIE 0x0
+#define MODE_SATA 0x4
+#define DEVICE_TYPE_MASK GENMASK(27, 24)
+#define EPCS_TXDEEMP BIT(5)
+#define EPCS_TXDEEMP_SEL BIT(6)
+#define EPCS_PHYRESET_N BIT(7)
+#define RESET_N BIT(12)
+
+#define IOB_RXENA BIT(0)
+#define IOB_TXENA BIT(1)
+#define IOB_A_0_TXOE BIT(2)
+#define IOB_A_0_M1M0_2 BIT(4)
+#define IOB_A_0_M1M0_MASK GENMASK(4, 3)
+#define PHYX1_EPCS_SEL BIT(12)
+#define PCIE_AB_SELECT BIT(13)
+#define CLKREQN_OUT_OVERRIDE GENMASK(25, 24)
+
+#define PHY_STTS0 0x4
+#define LANE0_TX_PLL_LOCK BIT(4)
+#define LANE1_TX_PLL_LOCK BIT(12)
+
+#define CTRL2 0x8
+#define LTSSM_ENABLE BIT(4)
+#define BUTTON_RST_N BIT(21)
+#define PERST_N BIT(22)
+#define POWER_UP_RST_N BIT(23)
+
+#define PCIE_STTS0 0xc
+#define PM_REQ_CORE_RST BIT(19)
+
+#define REG48_PMA_STATUS 0x30
+#define REG48_PMA_RDY BIT(7)
+
+struct imx8q_hsio_drvdata {
+ int num_lane;
+};
+
+struct imx8q_hsio_lane {
+ const char * const *clk_names;
+ struct clk_bulk_data clks[LANE_NUM_CLKS];
+ u32 clks_cnt;
+ u32 ctrl_id;
+ u32 ctrl_off;
+ u32 idx;
+ u32 phy_off;
+ struct imx8q_hsio_priv *priv;
+ struct phy *phy;
+ enum phy_mode lane_mode;
+};
+
+struct imx8q_hsio_priv {
+ void __iomem *base;
+ struct device *dev;
+ u32 refclk_pad_mode;
+ u32 hsio_cfg;
+ struct regmap *phy;
+ struct regmap *ctrl;
+ struct regmap *misc;
+ const struct imx8q_hsio_drvdata *drvdata;
+ struct imx8q_hsio_lane lane[MAX_NUM_LANES];
+};
+
+static const char * const imx8q_hsio_lan0_pcie_clks[] = {"apb_pclk0", "pclk0",
+ "ctl0_crr", "phy0_crr", "misc_crr"};
+static const char * const imx8q_hsio_lan1_pciea_clks[] = {"apb_pclk1", "pclk1",
+ "ctl0_crr", "phy0_crr", "misc_crr"};
+static const char * const imx8q_hsio_lan1_pcieb_clks[] = {"apb_pclk1", "pclk1",
+ "ctl1_crr", "phy0_crr", "misc_crr"};
+static const char * const imx8q_hsio_lan2_pcieb_clks[] = {"apb_pclk2", "pclk2",
+ "ctl1_crr", "phy1_crr", "misc_crr"};
+static const char * const imx8q_hsio_lane_sata_clks[] = {"pclk2", "epcs_tx",
+ "epcs_rx", "phy1_crr", "misc_crr"};
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int imx8q_hsio_init(struct phy *phy)
+{
+ int ret, i;
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+ struct device *dev = priv->dev;
+
+ /* Assign clocks refer to different modes */
+ switch (lane->ctrl_id) {
+ case IMX8Q_HSIO_PCIEA_ID:
+ if (lane->idx > 1) {
+ dev_err(dev, "invalid lane ID.");
+ return -EINVAL;
+ }
+
+ lane->lane_mode = PHY_MODE_PCIE;
+ lane->ctrl_off = 0;
+ lane->phy_off = 0;
+
+ for (i = 0; i < LANE_NUM_CLKS; i++) {
+ if (lane->idx)
+ lane->clks[i].id = imx8q_hsio_lan1_pciea_clks[i];
+ else
+ lane->clks[i].id = imx8q_hsio_lan0_pcie_clks[i];
+ }
+ break;
+ case IMX8Q_HSIO_PCIEB_ID:
+ if (lane->idx > 2) {
+ dev_err(dev, "invalid lane ID.");
+ return -EINVAL;
+ }
+
+ lane->lane_mode = PHY_MODE_PCIE;
+ if (lane->idx == 0) {
+ /* i.MX8QXP */
+ lane->ctrl_off = 0;
+ lane->phy_off = 0;
+ } else {
+ /*
+ * On i.MX8QM, only second or third lane PHY can
+ * be binded to PCIEB.
+ */
+ lane->ctrl_off = SZ_64K;
+ if (lane->idx == 1)
+ lane->phy_off = 0;
+ else /* idx == 2, the third lane is binded to PCIEB */
+ lane->phy_off = SZ_64K;
+ }
+
+ for (i = 0; i < LANE_NUM_CLKS; i++) {
+ if (lane->idx == 1)
+ lane->clks[i].id = imx8q_hsio_lan1_pcieb_clks[i];
+ else if (lane->idx == 2)
+ lane->clks[i].id = imx8q_hsio_lan2_pcieb_clks[i];
+ else /* i.MX8QXP only has PCIEB, it's idx == 0 */
+ lane->clks[i].id = imx8q_hsio_lan0_pcie_clks[i];
+
+ }
+ break;
+ case IMX8Q_HSIO_SATA_ID:
+ /* On i.MX8QM, only the third lane PHY can be binded to SATA */
+ if (lane->idx != 2) {
+ dev_err(dev, "invalid lane ID.");
+ return -EINVAL;
+ }
+ lane->ctrl_off = SZ_128K;
+ lane->lane_mode = PHY_MODE_SATA;
+ lane->phy_off = SZ_64K;
+
+ for (i = 0; i < LANE_NUM_CLKS; i++)
+ lane->clks[i].id = imx8q_hsio_lane_sata_clks[i];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Fetch clocks */
+ ret = devm_clk_bulk_get(dev, LANE_NUM_CLKS, lane->clks);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(LANE_NUM_CLKS, lane->clks);
+ if (ret)
+ return ret;
+
+ /* allow the clocks to stabilize */
+ usleep_range(200, 500);
+ return 0;
+}
+
+static int imx8q_hsio_exit(struct phy *phy)
+{
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(LANE_NUM_CLKS, lane->clks);
+
+ return 0;
+}
+
+static void imx8q_hsio_pcie_phy_resets(struct phy *phy)
+{
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ regmap_clear_bits(priv->ctrl, lane->ctrl_off + CTRL2, BUTTON_RST_N);
+ regmap_clear_bits(priv->ctrl, lane->ctrl_off + CTRL2, PERST_N);
+ regmap_clear_bits(priv->ctrl, lane->ctrl_off + CTRL2, POWER_UP_RST_N);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL2, BUTTON_RST_N);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL2, PERST_N);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL2, POWER_UP_RST_N);
+
+ if (lane->idx == 1) {
+ /* The second lane */
+ regmap_set_bits(priv->phy, lane->phy_off + CTRL0, APB_RSTN_1);
+ regmap_set_bits(priv->phy, lane->phy_off + CTRL0, PIPE_RSTN_1_MASK);
+ } else {
+ regmap_set_bits(priv->phy, lane->phy_off + CTRL0, APB_RSTN_0);
+ regmap_set_bits(priv->phy, lane->phy_off + CTRL0, PIPE_RSTN_0_MASK);
+ }
+}
+
+static void imx8q_hsio_sata_phy_resets(struct phy *phy)
+{
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ /* clear PHY RST, then set it */
+ regmap_clear_bits(priv->ctrl, lane->ctrl_off + CTRL0, EPCS_PHYRESET_N);
+
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL0, EPCS_PHYRESET_N);
+
+ /* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL0, RESET_N);
+ udelay(1);
+ regmap_clear_bits(priv->ctrl, lane->ctrl_off + CTRL0, RESET_N);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL0, RESET_N);
+}
+
+static void imx8q_hsio_configure_clk_pad(struct phy *phy)
+{
+ bool pll = false;
+ u32 pad_mode;
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ pad_mode = priv->refclk_pad_mode;
+ if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT) {
+ pll = true;
+ regmap_update_bits(priv->misc, CTRL0,
+ IOB_A_0_TXOE | IOB_A_0_M1M0_MASK,
+ IOB_A_0_TXOE | IOB_A_0_M1M0_2);
+ }
+
+ regmap_update_bits(priv->misc, CTRL0, IOB_RXENA, pll ? 0 : IOB_RXENA);
+ regmap_update_bits(priv->misc, CTRL0, IOB_TXENA, pll ? IOB_TXENA : 0);
+}
+
+static int imx8q_hsio_power_on(struct phy *phy)
+{
+ int ret;
+ u32 val, cond;
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ if (lane->lane_mode == PHY_MODE_PCIE)
+ imx8q_hsio_pcie_phy_resets(phy);
+ else
+ /* SATA */
+ regmap_set_bits(priv->phy, lane->phy_off + CTRL0, APB_RSTN_0);
+
+ if (priv->hsio_cfg & IMX8Q_HSIO_CFG_PCIEB)
+ regmap_set_bits(priv->misc, CTRL0, PCIE_AB_SELECT);
+ if (priv->hsio_cfg & IMX8Q_HSIO_CFG_SATA)
+ regmap_set_bits(priv->misc, CTRL0, PHYX1_EPCS_SEL);
+
+ imx8q_hsio_configure_clk_pad(phy);
+
+ if (lane->lane_mode == PHY_MODE_SATA) {
+ /*
+ * It is possible, for PCIe and SATA are sharing
+ * the same clock source, HPLL or external oscillator.
+ * When PCIe is in low power modes (L1.X or L2 etc),
+ * the clock source can be turned off. In this case,
+ * if this clock source is required to be toggling by
+ * SATA, then SATA functions will be abnormal.
+ * Set the override here to avoid it.
+ */
+ regmap_set_bits(priv->misc, CTRL0, CLKREQN_OUT_OVERRIDE);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL0, EPCS_TXDEEMP);
+ regmap_set_bits(priv->ctrl, lane->ctrl_off + CTRL0, EPCS_TXDEEMP_SEL);
+
+ imx8q_hsio_sata_phy_resets(phy);
+ } else {
+ /* Toggle apb_pclk to make sure clear the PM_REQ_CORE_RST bit */
+ clk_disable_unprepare(lane->clks[0].clk);
+ mdelay(1);
+ ret = clk_prepare_enable(lane->clks[0].clk);
+ if (ret) {
+ dev_err(priv->dev, "unable to enable phy apb_pclk\n");
+ return ret;
+ }
+
+ /* Bit19 PM_REQ_CORE_RST of pcie_stts0 should be cleared. */
+ ret = regmap_read_poll_timeout(priv->ctrl,
+ lane->ctrl_off + PCIE_STTS0,
+ val, (val & PM_REQ_CORE_RST) == 0,
+ PHY_INIT_WAIT_USLEEP_MAX,
+ PHY_INIT_WAIT_TIMEOUT);
+ if (ret) {
+ dev_err(priv->dev, "PM_REQ_CORE_RST is set\n");
+ return ret;
+ }
+ }
+
+ /* Polling to check the PHY is ready or not. */
+ if (lane->idx == 1)
+ cond = LANE1_TX_PLL_LOCK;
+ else
+ cond = LANE0_TX_PLL_LOCK;
+
+ ret = regmap_read_poll_timeout(priv->phy, lane->phy_off + PHY_STTS0,
+ val, ((val & cond) == cond),
+ PHY_INIT_WAIT_USLEEP_MAX, PHY_INIT_WAIT_TIMEOUT);
+ if (ret)
+ dev_err(priv->dev, "IMX8Q PHY%d PLL lock timeout\n", lane->idx);
+ else
+ dev_info(priv->dev, "IMX8Q PHY%d PLL is locked\n", lane->idx);
+
+ if (lane->lane_mode == PHY_MODE_SATA) {
+ cond = REG48_PMA_RDY;
+ ret = read_poll_timeout(readb, val, ((val & cond) == cond),
+ PHY_INIT_WAIT_USLEEP_MAX, PHY_INIT_WAIT_TIMEOUT,
+ false, priv->base + REG48_PMA_STATUS);
+ if (ret)
+ dev_err(priv->dev, "PHY calibration is timeout\n");
+ else
+ dev_info(priv->dev, "PHY calibration is done\n");
+ }
+
+ return ret;
+}
+
+static int imx8q_hsio_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ u32 val;
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ if (lane->lane_mode != mode)
+ return -EINVAL;
+
+ val = (mode == PHY_MODE_PCIE) ? MODE_PCIE : MODE_SATA;
+ val = FIELD_PREP(MODE_MASK, val);
+ regmap_update_bits(priv->phy, lane->phy_off + CTRL0, MODE_MASK, val);
+
+ switch (submode) {
+ case PHY_MODE_PCIE_RC:
+ val = FIELD_PREP(DEVICE_TYPE_MASK, PCI_EXP_TYPE_ROOT_PORT);
+ break;
+ case PHY_MODE_PCIE_EP:
+ val = FIELD_PREP(DEVICE_TYPE_MASK, PCI_EXP_TYPE_ENDPOINT);
+ break;
+ default: /* Support only PCIe EP and RC now. */
+ return 0;
+ }
+ if (submode)
+ regmap_update_bits(priv->ctrl, lane->ctrl_off + CTRL0,
+ DEVICE_TYPE_MASK, val);
+
+ return 0;
+}
+
+static int imx8q_hsio_set_speed(struct phy *phy, int speed)
+{
+ struct imx8q_hsio_lane *lane = phy_get_drvdata(phy);
+ struct imx8q_hsio_priv *priv = lane->priv;
+
+ regmap_update_bits(priv->ctrl, lane->ctrl_off + CTRL2, LTSSM_ENABLE,
+ speed ? LTSSM_ENABLE : 0);
+ return 0;
+}
+
+static const struct phy_ops imx8q_hsio_ops = {
+ .init = imx8q_hsio_init,
+ .exit = imx8q_hsio_exit,
+ .power_on = imx8q_hsio_power_on,
+ .set_mode = imx8q_hsio_set_mode,
+ .set_speed = imx8q_hsio_set_speed,
+ .owner = THIS_MODULE,
+};
+
+static const struct imx8q_hsio_drvdata imx8qxp_serdes_drvdata = {
+ .num_lane = 1,
+};
+
+static const struct imx8q_hsio_drvdata imx8qm_serdes_drvdata = {
+ .num_lane = 3,
+};
+
+static const struct of_device_id imx8q_hsio_of_match[] = {
+ {.compatible = "fsl,imx8qxp-serdes", .data = &imx8qxp_serdes_drvdata},
+ {.compatible = "fsl,imx8qm-serdes", .data = &imx8qm_serdes_drvdata},
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, imx8q_hsio_of_match);
+
+static struct phy *imx8q_hsio_xlate(struct device *dev,
+ const struct of_phandle_args *args)
+{
+ struct imx8q_hsio_priv *priv = dev_get_drvdata(dev);
+ int idx = args->args[0];
+ int ctrl_id = args->args[1];
+ int hsio_cfg = args->args[2];
+
+ if (idx >= priv->drvdata->num_lane)
+ return ERR_PTR(-EINVAL);
+ priv->lane[idx].idx = idx;
+ priv->lane[idx].ctrl_id = ctrl_id;
+ priv->hsio_cfg = hsio_cfg;
+
+ return priv->lane[idx].phy;
+}
+
+static int imx8q_hsio_probe(struct platform_device *pdev)
+{
+ int i;
+ void __iomem *off;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id;
+ struct imx8q_hsio_priv *priv;
+ struct phy_provider *provider;
+
+ of_id = of_match_device(imx8q_hsio_of_match, dev);
+ if (!of_id)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = &pdev->dev;
+ priv->drvdata = of_device_get_match_data(dev);
+
+ /* Get PHY refclk pad mode */
+ of_property_read_u32(np, "fsl,refclk-pad-mode", &priv->refclk_pad_mode);
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ off = devm_platform_ioremap_resource_byname(pdev, "phy");
+ priv->phy = devm_regmap_init_mmio(dev, off, ®map_config);
+ if (IS_ERR(priv->phy))
+ return dev_err_probe(dev, PTR_ERR(priv->phy),
+ "unable to find phy csr registers\n");
+
+ off = devm_platform_ioremap_resource_byname(pdev, "ctrl");
+ priv->ctrl = devm_regmap_init_mmio(dev, off, ®map_config);
+ if (IS_ERR(priv->ctrl))
+ return dev_err_probe(dev, PTR_ERR(priv->ctrl),
+ "unable to find ctrl csr registers\n");
+
+ off = devm_platform_ioremap_resource_byname(pdev, "misc");
+ priv->misc = devm_regmap_init_mmio(dev, off, ®map_config);
+ if (IS_ERR(priv->misc))
+ return dev_err_probe(dev, PTR_ERR(priv->misc),
+ "unable to find misc csr registers\n");
+
+ for (i = 0; i < priv->drvdata->num_lane; i++) {
+ struct imx8q_hsio_lane *lane = &priv->lane[i];
+ struct phy *phy;
+
+ memset(lane, 0, sizeof(*lane));
+
+ phy = devm_phy_create(&pdev->dev, NULL, &imx8q_hsio_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ lane->priv = priv;
+ lane->phy = phy;
+ lane->idx = i;
+ phy_set_drvdata(phy, lane);
+ }
+
+ dev_set_drvdata(dev, priv);
+ dev_set_drvdata(&pdev->dev, priv);
+
+ provider = devm_of_phy_provider_register(&pdev->dev, imx8q_hsio_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver imx8q_hsio_driver = {
+ .probe = imx8q_hsio_probe,
+ .driver = {
+ .name = "imx8q-hsio-phy",
+ .of_match_table = imx8q_hsio_of_match,
+ }
+};
+module_platform_driver(imx8q_hsio_driver);
+
+MODULE_DESCRIPTION("FSL IMX8Q HSIO SERDES PHY driver");
+MODULE_LICENSE("GPL");
--
2.37.1
More information about the linux-arm-kernel
mailing list