[PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
Vivek Unune
npcomplete13 at gmail.com
Fri Sep 22 12:16:53 PDT 2023
>
> From: Rafał Miłecki <rafal at milecki.pl>
>
> Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
> That syncs more Northstar code to be based on the same licensing schema.
>
> This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
> Make USB 3.0 PHY use MDIO PHY driver").
>
> Cc: Vivek Unune <npcomplete13 at gmail.com>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> Vivek: can you send your Acked-by for this patch, please?
> ---
> arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++
> arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
> 2 files changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
> index f0f3a718c413..d0d5f7e52a91 100644
> --- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
> @@ -327,6 +327,29 @@ mdio: mdio at 18003000 {
> #address-cells = <1>;
> };
>
> + mdio-mux at 18003000 {
> + compatible = "mdio-mux-mmioreg", "mdio-mux";
> + mdio-parent-bus = <&mdio>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x18003000 0x4>;
> + mux-mask = <0x200>;
> +
> + mdio at 0 {
> + reg = <0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usb3_phy: usb3-phy at 10 {
> + compatible = "brcm,ns-ax-usb3-phy";
> + reg = <0x10>;
> + usb3-dmp-syscon = <&usb3_dmp>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> + };
> + };
> +
> rng: rng at 18004000 {
> compatible = "brcm,bcm5301x-rng";
> reg = <0x18004000 0x14>;
> @@ -467,6 +490,10 @@ nand_controller: nand-controller at 18028000 {
> brcm,nand-has-wp;
> };
>
> + usb3_dmp: syscon at 18105000 {
> + reg = <0x18105000 0x1000>;
> + };
> +
> thermal-zones {
> cpu_thermal: cpu-thermal {
> polling-delay-passive = <0>;
> diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
> index de46dbd5b876..f06a178a9240 100644
> --- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
> @@ -62,33 +62,6 @@ periph_clk: periph_clk {
> };
> };
>
> - mdio-mux at 18003000 {
> - compatible = "mdio-mux-mmioreg", "mdio-mux";
> - mdio-parent-bus = <&mdio>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x18003000 0x4>;
> - mux-mask = <0x200>;
> -
> - mdio at 0 {
> - reg = <0x0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usb3_phy: usb3-phy at 10 {
> - compatible = "brcm,ns-ax-usb3-phy";
> - reg = <0x10>;
> - usb3-dmp-syscon = <&usb3_dmp>;
> - #phy-cells = <0>;
> - status = "disabled";
> - };
> - };
> - };
> -
> - usb3_dmp: syscon at 18105000 {
> - reg = <0x18105000 0x1000>;
> - };
> -
> i2c0: i2c at 18009000 {
> compatible = "brcm,iproc-i2c";
> reg = <0x18009000 0x50>;
> --
> 2.35.3
>
Acked-by: Vivek Unune <npcomplete13 at gmail.com>
More information about the linux-arm-kernel
mailing list