[PATCH v2 7/8] arm64: dts: qcom: add uart console support for SM4450

[Tengfei Fan]

在 9/20/2023 11:47 AM, Bjorn Andersson 写道:
> On Fri, Sep 15, 2023 at 10:15:08AM +0800, Tengfei Fan wrote:
>> Add base description of UART, TLMM, interconnect, TCSRCC and SMMU nodes
>> which helps SM4450 boot to shell with console on boards with this SoC.
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan at quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sm4450-qrd.dts |  18 +-
>>   arch/arm64/boot/dts/qcom/sm4450.dtsi    | 313 +++++++++++++++++++++---
>>   2 files changed, 301 insertions(+), 30 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>> index 00a1c81ca397..0f253a2ba170 100644
>> --- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
>> @@ -10,9 +10,23 @@
>>   	model = "Qualcomm Technologies, Inc. SM4450 QRD";
>>   	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
>>   
>> -	aliases { };
>> +	aliases {
>> +		serial0 = &uart7;
>> +	};
>>   
>>   	chosen {
>> -		bootargs = "console=hvc0";
>> +		stdout-path = "serial0:115200n8";
>>   	};
>>   };
>> +
>> +&qupv3_id_0 {
>> +	status = "okay";
>> +};
>> +
>> +&tlmm {
>> +	gpio-reserved-ranges = <0 4>, <136 1>;
>> +};
>> +
>> +&uart7 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> [..]
>> +		qupv3_id_0: geniqup at ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x00ac0000 0x0 0x2000>;
>> +			ranges;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0x163 0x0>;
>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
>> +			interconnect-names = "qup-core";
> 
> The patch ends up adding a smorgasbord of different things, some of
> which do relate to giving you a console and others mostly not related at
> all, because of the iommus and interconnects here.
> 
> If you omit these three properties from this, you can add the
> console, then add iommu and interconnect nodes in three clear patches.
> 
> 
> PS. Commit message says this is all needed for boot-to-shell, but I
> don't think you need scm, nor tcsr nodes to achieve that.
> 
> Regards,
> Bjorn

Hi Bjorn,
checked and confirmed your comments, you are right, will remove not 
related code.

-- 
Thx and BRs,
Tengfei Fan