[PATCH] dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml

[Rob Herring]

On Sat, 16 Sep 2023 17:48:26 +0200, Nik Bune wrote:
> Convert txt file to yaml.
> Add reg to the list of required properties.
> Add mainteiners from ./scripts/get_maintainer.pl output.
> 
> Signed-off-by: Nik Bune <n3q5u8 at yahoo.com>
> ---
>  .../watchdog/atmel,at91rm9200-wdt.yaml        | 31 +++++++++++++++++++
>  .../watchdog/atmel-at91rm9200-wdt.txt         |  9 ------
>  2 files changed, 31 insertions(+), 9 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,at91rm9200-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.example.dtb: watchdog at fffffd40: Unevaluated properties are not allowed ('atmel,dbg-halt', 'atmel,idle-halt', 'atmel,max-heartbeat-sec', 'atmel,min-heartbeat-sec', 'atmel,reset-type', 'atmel,watchdog-type', 'clocks', 'interrupts', 'timeout-sec' were unexpected)
	from schema $id: http://devicetree.org/schemas/watchdog/atmel,at91rm9200-wdt.yaml#
Documentation/devicetree/bindings/watchdog/atmel,at91rm9200-wdt.example.dtb: /example-0/watchdog at fffffd00: failed to match any schema with compatible: ['atmel,at91rm9200-wdt']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230916154826.84925-1-n3q5u8@yahoo.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.