[PATCH v2] mmc: meson-gx: Remove setting of CMD_CFG_ERROR

[Rong.Chen]

From: Rong Chen <rong.chen at amlogic.com>

For the t7 and older SoC families, the CMD_CFG_ERROR has no effect.
Starting from SoC family C3, setting this bit without SG LINK data
address will cause the controller to generate an IRQ and stop working.

To fix it, don't set the bit CMD_CFG_ERROR anymore.

Fixes: 18f92bc02f17 ("mmc: meson-gx: make sure the descriptor is stopped on errors")
Signed-off-by: Rong Chen <rong.chen at amlogic.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 9837dab096e6..c7c067b9415a 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -801,7 +801,6 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
 
 	cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
 	cmd_cfg |= CMD_CFG_OWNER;  /* owned by CPU */
-	cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
 
 	meson_mmc_set_response_bits(cmd, &cmd_cfg);
 
-- 
2.42.0