[PATCH v2] arm64: dts: imx8mp: add imx8mp-venice-gw74xx-rpidsi overlay for display

[Marc Kleine-Budde]

Hey Tim,

On 19.07.2023 08:29:20, Tim Harvey wrote:
> Add support for the following Raspberry Pi displays:
>  - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
>  - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
> 
> Both have the following hardware:
>  - FocalTech FT5406 10pt touch controller (with no interrupt)
>  - Powertip PH800480T013-IDF02 compatible panel
>  - Toshiba TC358762 compatible DSI to DBI bridge
>  - ATTINY based regulator used for backlight controller and panel enable
> 
> Support is added via a device-tree overlay. The touch controller is not
> yet supported as polling mode is needed.

I'm just integrating the 7in Raspberry Pi display for a customer on an
imx8mp. Do you have a (non-mainline) touch driver that works for the
Raspberry Pi display? I might fight some time in this project to work on
it.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20231025/7b937aa3/attachment.sig>