[PATCH] ARM: dts: renesas: marzen: Rename keyboard nodes

Geert Uytterhoeven geert+renesas at glider.be
Wed Oct 25 03:04:23 PDT 2023


make dtbs_check:

    arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: /: keyboard-gpio: {'compatible': ['gpio-keys-polled'], 'poll-interval': [[50]], 'pinctrl-0': [[29]], 'pinctrl-names': ['default'], 'key-3': {'gpios': [[28, 19, 1]], 'linux,code': [[4]], 'label': ['SW1-3'], 'debounce-interval': [[20]]}, 'key-4': {'gpios': [[28, 20, 1]], 'linux,code': [[5]], 'label': ['SW1-4'], 'debounce-interval': [[20]]}} is not of type 'array'
	    from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
    arch/arm/boot/dts/renesas/r8a7779-marzen.dtb: pinctrl at fffc0000: keyboard-gpio: {'pins': ['GP_0_19', 'GP_0_20'], 'bias-pull-up': True, 'phandle': [[29]]} is not of type 'array'
	    from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#

Node names ending in "-gpio" confuse the checker.
Fix this by renaming the keyboards to "keypad-0" and "keypad-1", as they
are not full keyboards.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
To be queued in renesas-devel for v6.8.

 arch/arm/boot/dts/renesas/r8a7779-marzen.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
index dfc6d63a21cd5474..c5c0bc70491ee903 100644
--- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts
@@ -52,10 +52,10 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	keyboard-irq {
+	keypad-0 {
 		compatible = "gpio-keys";
 
-		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-0 = <&keypad0_pins>;
 		pinctrl-names = "default";
 
 		interrupt-parent = <&gpio0>;
@@ -76,11 +76,11 @@ key-2 {
 		};
 	};
 
-	keyboard-gpio {
+	keypad-1 {
 		compatible = "gpio-keys-polled";
 		poll-interval = <50>;
 
-		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-0 = <&keypad1_pins>;
 		pinctrl-names = "default";
 
 		key-3 {
@@ -207,7 +207,7 @@ endpoint {
 };
 
 &gpio0 {
-	keyboard-irq-hog {
+	keypad0-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
 		input;
@@ -342,11 +342,11 @@ hspi0_pins: hspi0 {
 		function = "hspi0";
 	};
 
-	keyboard_irq_pins: keyboard-irq {
+	keypad0_pins: keypad-0 {
 		pins = "GP_0_17", "GP_0_18";
 		bias-pull-up;
 	};
-	keyboard_gpio_pins: keyboard-gpio {
+	keypad1_pins: keypad-1 {
 		pins = "GP_0_19", "GP_0_20";
 		bias-pull-up;
 	};
-- 
2.34.1




More information about the linux-arm-kernel mailing list