[PATCH v4 00/15] arm64: qcom: add and enable SHM Bridge support

[Andrew Halaney]

On Fri, Oct 13, 2023 at 01:48:28PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> 
> This is pretty much another full rewrite of the SHM Bridge support
> series. After more on- and off-list discussions I think this time it
> will be close to the final thing though.
> 
> We've established the need for using separate pools for SCM and QSEECOM
> as well as the upcoming scminvoke driver.
> 
> It's also become clear that in order to be future-proof, the new
> allocator must be an abstraction layer of a higher level as the SHM
> Bridge will not be the only memory protection mechanism that we'll see
> upstream. Hence the rename to TrustZone Memory rather than SCM Memory
> allocator.
> 
> Also to that end: the new allocator is its own module now and provides a
> Kconfig choice menu for selecting the mode of operation (currently
> default and SHM Bridge).
> 
> Due to a high divergence from v2, I dropped all tags except for
> patch 1/15 which didn't change.
> 
> Tested on sm8550 and sa8775p with the Inline Crypto Engine and
> remoteproc.

I took this for a spin on my x13s with SHM bridge enabled and don't see
any issues in the usecases that exercises. Also running on a debug
kernel with no warnings, etc.

Tested-by: Andrew Halaney <ahalaney at redhat.com> # sc8280xp-lenovo-thinkpad-x13s
> 
> v3 -> v4:
> - include linux/sizes.h for SZ_X macros
> - use dedicated RCU APIs to dereference radix tree slots
> - fix kerneldocs
> - fix the comment in patch 14/15: it's the hypervisor, not the TrustZone
>   that creates the SHM bridge
> 
> v2 -> v3:
> - restore pool management and use separate pools for different users
> - don't use the new allocator in qcom_scm_pas_init_image() as the
>   TrustZone will create an SHM bridge for us here
> - rewrite the entire series again for most part
> 
> v1 -> v2:
> - too many changes to list, it's a complete rewrite as explained above
> 
> Bartosz Golaszewski (15):
>   firmware: qcom: move Qualcomm code into its own directory
>   firmware: qcom: scm: add a missing forward declaration for struct
>     device
>   firmware: qcom: scm: remove unneeded 'extern' specifiers
>   firmware: qcom: add a dedicated TrustZone buffer allocator
>   firmware: qcom: scm: enable the TZ mem allocator
>   firmware: qcom: scm: smc: switch to using the SCM allocator
>   firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ
>     allocator
>   firmware: qcom: qseecom: convert to using the TZ allocator
>   firmware: qcom: scm: add support for SHM bridge operations
>   firmware: qcom: tzmem: enable SHM Bridge support
>   firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
>   arm64: defconfig: enable SHM Bridge support for the TZ memory
>     allocator
> 
>  MAINTAINERS                                   |   4 +-
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/firmware/Kconfig                      |  48 +--
>  drivers/firmware/Makefile                     |   5 +-
>  drivers/firmware/qcom/Kconfig                 |  86 +++++
>  drivers/firmware/qcom/Makefile                |  10 +
>  drivers/firmware/{ => qcom}/qcom_qseecom.c    |   0
>  .../{ => qcom}/qcom_qseecom_uefisecapp.c      | 261 +++++--------
>  drivers/firmware/{ => qcom}/qcom_scm-legacy.c |   0
>  drivers/firmware/{ => qcom}/qcom_scm-smc.c    |  28 +-
>  drivers/firmware/{ => qcom}/qcom_scm.c        | 179 +++++----
>  drivers/firmware/{ => qcom}/qcom_scm.h        |  21 +-
>  drivers/firmware/qcom/qcom_tzmem.c            | 365 ++++++++++++++++++
>  drivers/firmware/qcom/qcom_tzmem.h            |  13 +
>  include/linux/firmware/qcom/qcom_qseecom.h    |   4 +-
>  include/linux/firmware/qcom/qcom_scm.h        |   6 +
>  include/linux/firmware/qcom/qcom_tzmem.h      |  28 ++
>  17 files changed, 746 insertions(+), 313 deletions(-)
>  create mode 100644 drivers/firmware/qcom/Kconfig
>  create mode 100644 drivers/firmware/qcom/Makefile
>  rename drivers/firmware/{ => qcom}/qcom_qseecom.c (100%)
>  rename drivers/firmware/{ => qcom}/qcom_qseecom_uefisecapp.c (84%)
>  rename drivers/firmware/{ => qcom}/qcom_scm-legacy.c (100%)
>  rename drivers/firmware/{ => qcom}/qcom_scm-smc.c (91%)
>  rename drivers/firmware/{ => qcom}/qcom_scm.c (93%)
>  rename drivers/firmware/{ => qcom}/qcom_scm.h (88%)
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.c
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.h
>  create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h
> 
> -- 
> 2.39.2
>