[PATCH v6 2/7] arm64: dts: ti: k3-j784s4: Add ESM instances
J, KEERTHY
j-keerthy at ti.com
Wed Oct 4 18:15:26 PDT 2023
On 10/3/2023 12:20 PM, Vignesh Raghavendra wrote:
>
>
> On 27/09/23 08:03, Keerthy wrote:
>> Patch adds the ESM instances for j784s4. It has 3 instances.
>> One in the main domain and two in the mcu-wakeup domian.
>>
>> Signed-off-by: Keerthy <j-keerthy at ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 8 ++++++++
>> arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 14 ++++++++++++++
>> 2 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index efed2d683f63..26dc3776f911 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -1568,4 +1568,12 @@
>> firmware-name = "j784s4-c71_3-fw";
>> status = "disabled";
>> };
>> +
>> + main_esm: esm at 700000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x700000 0x00 0x1000>;
>> + ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
>> + <695>;
>> + bootph-pre-ram;
>
> Similar to other nodes in this file, here and elsewhere use
> bootph-all
Okay. I will switch to bootph-all
>
>
>> + };
>> };
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> index 4ab4018d3695..a7b5c4cb7d3e 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
>> @@ -700,4 +700,18 @@
>> status = "disabled";
>> };
>> };
>> +
>> + mcu_esm: esm at 40800000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x40800000 0x00 0x1000>;
>> + ti,esm-pins = <95>;
>> + bootph-pre-ram;
>> + };
>> +
>> + wkup_esm: esm at 42080000 {
>> + compatible = "ti,j721e-esm";
>> + reg = <0x00 0x42080000 0x00 0x1000>;
>> + ti,esm-pins = <63>;
>> + bootph-pre-ram;
>> + };
>> };
>
More information about the linux-arm-kernel
mailing list