[PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy

[Praveenkumar I]

On 9/30/2023 8:26 PM, Krzysztof Kozlowski wrote:
> On 29/09/2023 10:42, Praveenkumar I wrote:
>> Document the Qualcomm USB3 22ull UNIPHY present in IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
>> ---
>>   .../bindings/phy/qcom,ipq5332-usb-uniphy.yaml | 83 +++++++++++++++++++
>>   1 file changed, 83 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
> Filename should match compatible.
Will address it.
>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
>> new file mode 100644
>> index 000000000000..90434cee9cdd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
>> @@ -0,0 +1,83 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-uniphy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm USB Super-Speed UNIPHY
>> +
>> +maintainers:
>> +  - Praveenkumar I <quic_ipkumar at quicinc.com>
>> +  - Varadarajan Narayanan <quic_varada at quicinc.com>
>> +
>> +description:
>> +  USB Super-Speed UNIPHY found in Qualcomm IPQ5332, IPQ5018 SoCs.
>> +
>> +properties:
>> +  compatible:
>> +    items:
> Drop items, not needed.
Sure, will drop.
>
>> +      - const: qcom,ipq5332-usb-ssphy
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 3
>> +
>> +  clock-names:
>> +    items:
>> +      - const: ahb
>> +      - const: cfg_ahb
>> +      - const: pipe
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  vdd-supply:
>> +    description:
>> +      Phandle to 5V regulator supply to PHY digital circuit.
>> +
>> +  qcom,phy-usb-mux-sel:
>> +    description: PHY Mux Selection for USB
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    items:
>> +      - items:
>> +          - description: phandle of TCSR syscon
>> +          - description: offset of PHY Mux selection register
>> +
>> +  "#clock-cells":
>> +    const: 0
>> +
>> +  clock-output-names:
>> +    maxItems: 1
>> +
>> +  "#phy-cells":
>> +    const: 0
> You miss required: block.
Sure, will add.

--
Thanks,
Praveenkumar
>
> Best regards,
> Krzysztof
>