[PATCH v2 RESEND 1/2] i2c: aspeed: Fix unhandled Tx done with NAK

Andi Shyti andi.shyti at kernel.org
Tue Nov 28 16:35:42 PST 2023


Hi Quan,

On Tue, Nov 28, 2023 at 02:52:35PM +0700, Quan Nguyen wrote:
> Under normal conditions, after the last byte is sent by the Slave, the
> TX_NAK interrupt is raised.  However, it is also observed that
> sometimes the Master issues the next transaction too quickly while the
> Slave IRQ handler is not yet invoked and the TX_NAK interrupt for the
> last byte of the previous READ_PROCESSED state has not been ack’ed.
> This TX_NAK interrupt is then raised together with SLAVE_MATCH interrupt
> and RX_DONE interrupt of the next coming transaction from Master. The
> Slave IRQ handler currently handles the SLAVE_MATCH and RX_DONE, but
> ignores the TX_NAK, causing complaints such as
> "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
> 0x00000086, but was 0x00000084"
> 
> This commit adds code to handle this case by emitting a SLAVE_STOP event
> for the TX_NAK before processing the RX_DONE for the coming transaction
> from the Master.
> 
> Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
> Signed-off-by: Quan Nguyen <quan at os.amperecomputing.com>
> ---
> v2:
>   + Split to separate series [Joel]
>   + Added the Fixes line [Joel]
>   + Revised commit message [Quan]
> 
> v1:
>   + First introduced in
> https://lore.kernel.org/all/20210519074934.20712-1-quan@os.amperecomputing.com/
> ---
>  drivers/i2c/busses/i2c-aspeed.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index 28e2a5fc4528..79476b46285b 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -253,6 +253,11 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>  
>  	/* Slave was requested, restart state machine. */
>  	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
> +		if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
> +		    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
> +			irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
> +			i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
> +		}

this is a duplicate of a later "if (...)" satement. What is the
need for having them both?

Andi

>  		irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
>  		bus->slave_state = ASPEED_I2C_SLAVE_START;
>  	}
> -- 
> 2.35.1
> 



More information about the linux-arm-kernel mailing list