[PATCH v2 3/3] iommu/arm-smmu: re-enable context caching in smmu reset operation

Bibek Kumar Patro quic_bibekkum at quicinc.com
Fri Nov 17 01:10:13 PST 2023



On 11/16/2023 10:34 PM, Robin Murphy wrote:
> On 16/11/2023 3:24 pm, Dmitry Baryshkov wrote:
>> On Thu, 16 Nov 2023 at 14:45, Bibek Kumar Patro
>> <quic_bibekkum at quicinc.com> wrote:
>>>
>>>
>>>
>>> On 11/15/2023 4:33 PM, Dmitry Baryshkov wrote:
>>>> On Wed, 15 Nov 2023 at 11:45, Bibek Kumar Patro
>>>> <quic_bibekkum at quicinc.com> wrote:
>>>>>
>>>>> On 11/14/2023 7:45 PM, Dmitry Baryshkov wrote:
>>>>>> On Tue, 14 Nov 2023 at 15:57, Bibek Kumar Patro
>>>>>> <quic_bibekkum at quicinc.com> wrote:
>>>>>>>
>>>>>>> Context caching is re-enabled in the prefetch buffer for Qualcomm 
>>>>>>> SoCs
>>>>>>> through SoC specific reset ops, which is disabled in the default 
>>>>>>> MMU-500
>>>>>>> reset ops, but is expected for context banks using ACTLR register to
>>>>>>> retain the prefetch value during reset and runtime suspend.
>>>>>>
>>>>>> Please refer to Documentation/process/submitting-patches.rst and
>>>>>> rephrase this following the rules there.
>>>>>>
>>>>>
>>>>> Noted, will go through the description once and rephrase it
>>>>> in next version complying with rules.
>>>>>
>>>>>>>
>>>>>>> Signed-off-by: Bibek Kumar Patro <quic_bibekkum at quicinc.com>
>>>>>>> ---
>>>>>>>     drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 25 
>>>>>>> ++++++++++++++++++----
>>>>>>>     1 file changed, 21 insertions(+), 4 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c 
>>>>>>> b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>>>>> index 0eaf6f2a2e49..fa867b1d9d16 100644
>>>>>>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>>>>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>>>>>>> @@ -478,11 +478,28 @@ static int qcom_smmu_def_domain_type(struct 
>>>>>>> device *dev)
>>>>>>>            return match ? IOMMU_DOMAIN_IDENTITY : 0;
>>>>>>>     }
>>>>>>>
>>>>>>> +static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
>>>>>>> +{
>>>>>>> +       int i;
>>>>>>> +       u32 reg;
>>>>>>> +
>>>>>>> +       arm_mmu500_reset(smmu);
>>>>>>> +
>>>>>>> +       /* Re-enable context caching after reset */
>>>>>>> +       for (i = 0; i < smmu->num_context_banks; ++i) {
>>>>>>> +               reg = arm_smmu_cb_read(smmu, i, ARM_SMMU_CB_ACTLR);
>>>>>>> +               reg |= CPRE;
>>>>>>> +               arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_ACTLR, reg);
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>>     static int qcom_sdm845_smmu500_reset(struct arm_smmu_device 
>>>>>>> *smmu)
>>>>>>>     {
>>>>>>>            int ret;
>>>>>>>
>>>>>>> -       arm_mmu500_reset(smmu);
>>>>>>> +       qcom_smmu500_reset(smmu);
>>>>>>
>>>>>> Is this applicable for sdm845? For all other platforms supported by
>>>>>> qcom_smmu_500 implementation?
>>>>>>
>>>>>
>>>>> In arm_mmu500_reset operation 
>>>>> drivers/iommu/arm/arm-smmu/arm-smmu-impl.c
>>>>> CPRE bit is reset for all SoC based on mmu500 platform, hence for all
>>>>> Qualcomm SoCs including sm845 we are setting back the CPRE bit.
>>>>
>>>> The errata for the CoreLink MMU-500 requires CPRE to be disabled for
>>>> all revisions before r2p2. Do we know whether these SoC used CoreLink
>>>> MMU-500 and which version of it?
>>>>
>>>
>>> Just checked all these SoCs are using r2p4 revision.
>>> So CPRE needs to be enabled back here then?
>>
>> can be enabled, yes.
> 
> There are still open errata #562869 and #1047329 which might need this 
> workaround. I guess one could argue that we're not (knowingly) using 
> nested translation at the moment, and also probably not running this in 
> situations which would end up using short-descriptor format, however 
> stuff like pKVM and IOMMUFD could potentially change those assumptions 
> in future, so they still feel a bit sketchy to me.
> 

Could you help provide some details on these two errata (#562869 and 
#1047329).Both of these erratum are there for r2p4 revisions as well?

Thanks & regards,
Bibek

> Thanks,
> Robin.
> 
>>
>>>
>>>>>
>>>>>>>
>>>>>>>            /*
>>>>>>>             * To address performance degradation in non-real time 
>>>>>>> clients,
>>>>>>> @@ -509,7 +526,7 @@ static const struct arm_smmu_impl 
>>>>>>> qcom_smmu_500_impl = {
>>>>>>>            .init_context = qcom_smmu_init_context,
>>>>>>>            .cfg_probe = qcom_smmu_cfg_probe,
>>>>>>>            .def_domain_type = qcom_smmu_def_domain_type,
>>>>>>> -       .reset = arm_mmu500_reset,
>>>>>>> +       .reset = qcom_smmu500_reset,
>>>>>>>            .write_s2cr = qcom_smmu_write_s2cr,
>>>>>>>            .tlb_sync = qcom_smmu_tlb_sync,
>>>>>>>     };
>>>>>>> @@ -528,7 +545,7 @@ static const struct arm_smmu_impl 
>>>>>>> sm8550_smmu_500_impl = {
>>>>>>>            .init_context = qcom_smmu_init_context,
>>>>>>>            .cfg_probe = qcom_smmu_cfg_probe,
>>>>>>>            .def_domain_type = qcom_smmu_def_domain_type,
>>>>>>> -       .reset = arm_mmu500_reset,
>>>>>>> +       .reset = qcom_smmu500_reset,
>>>>>>>            .write_s2cr = qcom_smmu_write_s2cr,
>>>>>>>            .tlb_sync = qcom_smmu_tlb_sync,
>>>>>>>     };
>>>>>>> @@ -544,7 +561,7 @@ static const struct arm_smmu_impl 
>>>>>>> qcom_adreno_smmu_v2_impl = {
>>>>>>>     static const struct arm_smmu_impl qcom_adreno_smmu_500_impl = {
>>>>>>>            .init_context = qcom_adreno_smmu_init_context,
>>>>>>>            .def_domain_type = qcom_smmu_def_domain_type,
>>>>>>> -       .reset = arm_mmu500_reset,
>>>>>>> +       .reset = qcom_smmu500_reset,
>>>>>>>            .alloc_context_bank = 
>>>>>>> qcom_adreno_smmu_alloc_context_bank,
>>>>>>>            .write_sctlr = qcom_adreno_smmu_write_sctlr,
>>>>>>>            .tlb_sync = qcom_smmu_tlb_sync,
>>>>>>> -- 
>>>>>>> 2.17.1
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>>
>>>> -- 
>>>> With best wishes
>>>> Dmitry
>>
>>
>>



More information about the linux-arm-kernel mailing list