[RFC 3/6] media: verisilicon: Improve constant's name

Chen-Yu Tsai wenst at chromium.org
Thu Nov 16 22:11:48 PST 2023


On Thu, Nov 16, 2023 at 11:48 PM Andrzej Pietrasiewicz
<andrzej.p at collabora.com> wrote:
>
> For VP8 BIT(18) of this register is for enabling the boolean encoder.

Yes, but for H.264 it selects the entropy coding mode, 0 for CAVLC
and 1 for CABAC. You even add it back in the last patch. I'd do it
here, so you disambiguate the definition within one patch.

ChenYu


> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p at collabora.com>
> ---
>  drivers/media/platform/verisilicon/hantro_h1_regs.h    | 2 +-
>  drivers/media/platform/verisilicon/hantro_h1_vp8_enc.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/verisilicon/hantro_h1_regs.h b/drivers/media/platform/verisilicon/hantro_h1_regs.h
> index 7752d1291c0e..c1c66c934a24 100644
> --- a/drivers/media/platform/verisilicon/hantro_h1_regs.h
> +++ b/drivers/media/platform/verisilicon/hantro_h1_regs.h
> @@ -70,7 +70,7 @@
>  #define    H1_REG_ENC_CTRL2_DISABLE_QUARTER_PIXMV      BIT(22)
>  #define    H1_REG_ENC_CTRL2_TRANS8X8_MODE_EN           BIT(21)
>  #define    H1_REG_ENC_CTRL2_CABAC_INIT_IDC(x)          ((x) << 19)
> -#define    H1_REG_ENC_CTRL2_ENTROPY_CODING_MODE                BIT(18)
> +#define    H1_REG_ENC_CTRL2_VP8_BOOLENC_ENABLE         BIT(18)
>  #define    H1_REG_ENC_CTRL2_H264_INTER4X4_MODE         BIT(17)
>  #define    H1_REG_ENC_CTRL2_H264_STREAM_MODE           BIT(16)
>  #define    H1_REG_ENC_CTRL2_INTRA16X16_MODE(x)         ((x))
> diff --git a/drivers/media/platform/verisilicon/hantro_h1_vp8_enc.c b/drivers/media/platform/verisilicon/hantro_h1_vp8_enc.c
> index 05aa0dd9c09c..08c5079fbfd0 100644
> --- a/drivers/media/platform/verisilicon/hantro_h1_vp8_enc.c
> +++ b/drivers/media/platform/verisilicon/hantro_h1_vp8_enc.c
> @@ -1226,7 +1226,7 @@ static void hantro_h1_vp8_enc_set_params(struct hantro_dev *vpu, struct hantro_c
>         reg = 0;
>         if (mb_width * mb_height > MAX_MB_COUNT_TO_DISABLE_QUARTER_PIXEL_MV)
>                 reg = H1_REG_ENC_CTRL2_DISABLE_QUARTER_PIXMV;
> -       reg |= H1_REG_ENC_CTRL2_ENTROPY_CODING_MODE;
> +       reg |= H1_REG_ENC_CTRL2_VP8_BOOLENC_ENABLE;
>
>         inter_favor = 128 - ctx->vp8_enc.prob_intra;
>         if (inter_favor >= 0)
> --
> 2.25.1
>
>



More information about the linux-arm-kernel mailing list