[PATCH 3/7] arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy

[Nishanth Menon]

MCU domain has it's own secure proxy for communicating with ROM and
for R5 micro controller firmware operations. This is in addition to
the one in the main domain NAVSS subsystem that is used for general
purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
New patch

 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index c5bf7a0d6279..badb1ee8f60d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -227,6 +227,21 @@ mcu_udmap: dma-controller at 285c0000 {
 		};
 	};
 
+	secure_proxy_mcu: mailbox at 2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
 	m_can0: can at 40528000 {
 		compatible = "bosch,m_can";
 		reg = <0x0 0x40528000 0x0 0x400>,
-- 
2.40.0