[PATCH] arm64: dts: mediatek: mt8173-elm: remove panel model number in DT

Doug Anderson dianders at chromium.org
Fri May 26 07:24:15 PDT 2023


Hi,

On Fri, May 26, 2023 at 3:09 AM Icenowy Zheng <uwu at icenowy.me> wrote:
>
> Currently a specific panel number is used in the Elm DTSI, which is
> corresponded to a 12" panel. However, according to the official Chrome
> OS devices document, Elm refers to Acer Chromebook R13, which, as the
> name specifies, uses a 13.3" panel, which comes with EDID information.
>
> As the kernel currently prioritizes the hardcoded timing parameters
> matched with the panel number compatible, a wrong timing will be applied
> to the 13.3" panel on Acer Chromebook R13, which leads to blank display.
>
> Because the Elm DTSI is shared with Hana board, and Hana corresponds to
> multiple devices from 11" to 14", a certain panel model number shouldn't
> be present, and driving the panel according to its EDID information is
> necessary.
>
> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

We went through a bunch of back-and-forth here but in the end in the
ChromeOS tree we have "edp-panel" as the "compatible" here in the
ChromeOS 5.15 tree and this makes sense.

Reviewed-by: Douglas Anderson <dianders at chromium.org>

...in theory one would wish for a "Fixes" tag, but I think in previous
discussions it was decided that it was too complicated. Hardcoding the
other compatible string has always been technically wrong, but I guess
it worked at some point in time. The more correct way (as you're doing
here) needs the DP AUX bus support and the generic eDP panels, both of
which are significantly newer than the elm dts. So I guess leaving no
"Fixes" tag is OK, or perhaps you could do the somewhat weak:

Fixes: c2d94f72140a ("arm64: dts: mediatek: mt8173-elm: Move display
to ps8640 auxiliary bus")



More information about the linux-arm-kernel mailing list