[PATCH] spi: mt65xx: make sure operations completed before unloading

Geert Uytterhoeven geert at linux-m68k.org
Thu May 25 00:23:35 PDT 2023


Hi Daniel,

On Mon, May 1, 2023 at 8:37 PM Daniel Golle <daniel at makrotopia.org> wrote:
> When unloading the spi-mt65xx kernel module during an ongoing spi-mem
> operation the kernel will Oops shortly after unloading the module.
> This is because wait_for_completion_timeout was still running and
> returning into the no longer loaded module:
>
> Internal error: Oops: 0000000096000005 [#1] SMP
> Modules linked in: [many, but spi-mt65xx is no longer there]
> CPU: 0 PID: 2578 Comm: block Tainted: G        W  O       6.3.0-next-20230428+ #0
> Hardware name: Bananapi BPI-R3 (DT)
> pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : __lock_acquire+0x18c/0x20e8
> lr : __lock_acquire+0x9b8/0x20e8
> sp : ffffffc009ec3400
> x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004
> x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000
> x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968
> x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af
> x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970
> x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea
> x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918
> x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000
> x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027
> x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2
> Call trace:
>  __lock_acquire+0x18c/0x20e8
>  lock_acquire+0x100/0x2a4
>  _raw_spin_lock_irq+0x58/0x74
>  __wait_for_common+0xe0/0x1b4
>  wait_for_completion_timeout+0x1c/0x24
>  0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait
>  spi_mem_exec_op+0x390/0x3ec
>  spi_mem_no_dirmap_read+0x6c/0x88
>  spi_mem_dirmap_read+0xcc/0x12c
>  spinand_read_page+0xf8/0x1dc
>  spinand_mtd_read+0x1b4/0x2fc
>  mtd_read_oob_std+0x58/0x7c
>  mtd_read_oob+0x8c/0x148
>  mtd_read+0x50/0x6c
>  ...
>
> Prevent this by completing in mtk_spi_remove if needed.
>
> Fixes: 9f763fd20da7 ("spi: mediatek: add spi memory support for ipm design")
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>

Thanks for your patch, which is now commit 4be47a5d59cbc939 ("spi:
mt65xx: make sure operations completed before unloading") in spi/for-next.

> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -1275,6 +1275,9 @@ static int mtk_spi_remove(struct platform_device *pdev)
>         struct mtk_spi *mdata = spi_master_get_devdata(master);
>         int ret;
>
> +       if (mdata->use_spimem && !completion_done(&mdata->spimem_done))
> +               complete(&mdata->spimem_done);

I'm afraid that is not sufficient, as the code that was waiting on the
completion accesses hardware registers and driver-private data after
that, and there is no guarantee all of that has completed by the time
mtk_spi_remove() finishes.

> +
>         ret = pm_runtime_resume_and_get(&pdev->dev);
>         if (ret < 0)
>                 return ret;

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



More information about the linux-arm-kernel mailing list