[PATCH V7 0/8] Add minimal boot support for IPQ5018

Sricharan Ramabadhran quic_srichara at quicinc.com
Fri May 19 05:54:01 PDT 2023


The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq5018-mp03.1-c2 board.

[v7]   Fixed tz reserved region size in patch 7/8

[v6]   Fixed patch [4/8] pinctrl driver for rebase issue.

[v5]
       Added Reviewed-by tags from Krzysztof Kozlowski.
       Changed patch [6/8] with [1] since its already Acked
       Rebased patch [4/8] on top of [2] and fixed other comments
       Fixed commit log for patch [7/8]
       Fixed comments for patch [2/8]

[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1678164097-13247-4-git-send-email-quic_mmanikan@quicinc.com/
[2] https://lore.kernel.org/r/1683718725-14869-1-git-send-email-quic_rohiagar@quicinc.com
       
[v4]
       Fixed all comments for clocks, schema, dts
       Added Reviewed-by tags.

[v3]
	Fixed all comments for clocks, schema fixes
        Picked up Reviewed-by from Bjorn for pinctrl driver

[v2]
	Fixed all comments and rebased for TOT.

Manikanta Mylavarapu (1):
  dt-bindings: scm: Add compatible for IPQ5018

Sricharan Ramabadhran (7):
  dt-bindings: arm64: Add IPQ5018 clock and reset
  clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
  dt-bindings: pinctrl: qcom: Add support for ipq5018
  pinctrl: qcom: Add IPQ5018 pinctrl driver
  dt-bindings: qcom: Add ipq5018 bindings
  arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  arm64: defconfig: Enable IPQ5018 SoC base configs

 .../devicetree/bindings/arm/qcom.yaml         |    7 +
 .../bindings/clock/qcom,ipq5018-gcc.yaml      |   63 +
 .../bindings/firmware/qcom,scm.yaml           |    1 +
 .../bindings/pinctrl/qcom,ipq5018-tlmm.yaml   |  127 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |   72 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         |  250 ++
 arch/arm64/configs/defconfig                  |    3 +
 drivers/clk/qcom/Kconfig                      |   10 +-
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/gcc-ipq5018.c                | 3731 +++++++++++++++++
 drivers/pinctrl/qcom/Kconfig                  |   10 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq5018.c        |  783 ++++
 include/dt-bindings/clock/qcom,gcc-ipq5018.h  |  183 +
 include/dt-bindings/reset/qcom,gcc-ipq5018.h  |  122 +
 16 files changed, 5363 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
 create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
 create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h

-- 
2.34.1




More information about the linux-arm-kernel mailing list