[PATCH v5 2/5] dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml

[Krzysztof Kozlowski]

On 18/05/2023 08:03, Claudiu.Beznea at microchip.com wrote:
> On 17.05.2023 17:21, Krzysztof Kozlowski wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> On 17/05/2023 11:41, Claudiu Beznea wrote:
>>> Convert Atmel PMC documentation to yaml. Along with it clock names
>>> were adapted according to the current available device trees as
>>> different controller versions accept different clock (some of them
>>> have 3 clocks as input, some has 2 clocks as inputs and some with 2
>>> input clocks uses different clock names).
>>
>> Thank you for your patch. There is something to discuss/improve.
>>
>>
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - atmel,at91rm9200-pmc
>>> +              - atmel,at91sam9260-pmc
>>> +              - atmel,at91sam9g20-pmc
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: slow_xtal
>>> +            - const: main_xtal
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - atmel,sama5d2-pmc
>>> +              - atmel,sama5d3-pmc
>>> +              - atmel,sama5d4-pmc
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: slow_clk
>>> +            - const: main_xtal
>>
>> This and previous if, should be squashed. You have exactly the same then:.
> 
> Clock names are different. Or do you propose to have a if for
> clocks:
>   minItems: 2
>   maxItems: 2
> 
> and 2 ifs for clock names?

Ah, I see, they have different names - xtal -> clk.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>


Best regards,
Krzysztof