[PATCH V2 3/5] coresight: etm4x: Drop pid argument from etm4_probe()
Suzuki K Poulose
suzuki.poulose at arm.com
Wed May 17 02:38:46 PDT 2023
On 17/05/2023 05:32, Anshuman Khandual wrote:
>
>
> On 3/31/23 16:36, Suzuki K Poulose wrote:
>> On 27/03/2023 06:05, Anshuman Khandual wrote:
>>> Coresight device pid can be retrieved from its iomem base address, which is
>>> stored in 'struct etm4x_drvdata'. This drops pid argument from etm4_probe()
>>> and 'struct etm4_init_arg'. Instead etm4_check_arch_features() derives the
>>> coresight device pid with a new helper coresight_get_pid(), right before it
>>> is consumed in etm4_hisi_match_pid().
>>>
>>> Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
>>> Cc: Suzuki K Poulose <suzuki.poulose at arm.com>
>>> Cc: Mike Leach <mike.leach at linaro.org>
>>> Cc: Leo Yan <leo.yan at linaro.org>
>>> Cc: coresight at lists.linaro.org
>>> Cc: linux-arm-kernel at lists.infradead.org
>>> Cc: linux-kernel at vger.kernel.org
>>> Signed-off-by: Anshuman Khandual <anshuman.khandual at arm.com>
>>> ---
>>> .../coresight/coresight-etm4x-core.c | 21 +++++++------------
>>> include/linux/coresight.h | 12 +++++++++++
>>> 2 files changed, 20 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>>> index 5d77571a8df9..3521838ab4fb 100644
>>> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
>>> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>>> @@ -66,7 +66,6 @@ static u64 etm4_get_access_type(struct etmv4_config *config);
>>> static enum cpuhp_state hp_online;
>>> struct etm4_init_arg {
>>> - unsigned int pid;
>>> struct device *dev;
>>> struct csdev_access *csa;
>>> };
>>> @@ -370,8 +369,10 @@ static void etm4_disable_arch_specific(struct etmv4_drvdata *drvdata)
>>> }
>>> static void etm4_check_arch_features(struct etmv4_drvdata *drvdata,
>>> - unsigned int id)
>>> + struct csdev_access *csa)
>>> {
>>> + unsigned int id = coresight_get_pid(csa);
>>> +
>>
>> This throws up the following error on an ETE.
>>
>> ete: trying to read unsupported register @fe0
>>
>> So, I guess this must be performed only for iomem based
>> devices. System instruction based device must be identified
>> by MIDR_EL1/REVIDR_EL1 if needed for specific erratum.
>> This is not required now. So, we could bail out early
>> if we are system instruction based device.
>
> Will bail out on non iomem devices via drvdata->base address switch.
>
> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> @@ -373,9 +373,10 @@ static void etm4_disable_arch_specific(struct etmv4_drvdata *drvdata)
> static void etm4_check_arch_features(struct etmv4_drvdata *drvdata,
> struct csdev_access *csa)
> {
> - unsigned int id = coresight_get_pid(csa);
> + if (!drvdata->base)
> + return;
I would use !csa->io_mem to be more readerf friendly.
>
> - if (etm4_hisi_match_pid(id))
> + if (etm4_hisi_match_pid(coresight_get_pid(csa)))
> set_bit(ETM4_IMPDEF_HISI_CORE_COMMIT, drvdata->arch_features);
> }
> #else
>
>>
>>
>>> if (etm4_hisi_match_pid(id))
>>> set_bit(ETM4_IMPDEF_HISI_CORE_COMMIT, drvdata->arch_features);
>>> }
>>> @@ -385,7 +386,7 @@ static void etm4_disable_arch_specific(struct etmv4_drvdata *drvdata)
>>> }
>>> static void etm4_check_arch_features(struct etmv4_drvdata *drvdata,
>>> - unsigned int id)
>>> + struct csdev_access *csa)
>>> {
>>> }
>>> #endif /* CONFIG_ETM4X_IMPDEF_FEATURE */
>>> @@ -1165,7 +1166,7 @@ static void etm4_init_arch_data(void *info)
>>> etm4_os_unlock_csa(drvdata, csa);
>>> etm4_cs_unlock(drvdata, csa);
>>> - etm4_check_arch_features(drvdata, init_arg->pid);
>>> + etm4_check_arch_features(drvdata, csa);
>>> /* find all capabilities of the tracing unit */
>>> etmidr0 = etm4x_relaxed_read32(csa, TRCIDR0);
>>> @@ -2048,7 +2049,7 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg)
>>> return 0;
>>> }
>>> -static int etm4_probe(struct device *dev, u32 etm_pid)
>>> +static int etm4_probe(struct device *dev)
>>> {
>>> struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
>>> struct csdev_access access = { 0 };
>>> @@ -2077,7 +2078,6 @@ static int etm4_probe(struct device *dev, u32 etm_pid)
>>> init_arg.dev = dev;
>>> init_arg.csa = &access;
>>> - init_arg.pid = etm_pid;
>>> /*
>>> * Serialize against CPUHP callbacks to avoid race condition
>>> @@ -2124,7 +2124,7 @@ static int etm4_probe_amba(struct amba_device *adev, const struct amba_id *id)
>>> drvdata->base = base;
>>> dev_set_drvdata(dev, drvdata);
>>> - ret = etm4_probe(dev, id->id);
>>> + ret = etm4_probe(dev);
>>> if (!ret)
>>> pm_runtime_put(&adev->dev);
>>> @@ -2146,12 +2146,7 @@ static int etm4_probe_platform_dev(struct platform_device *pdev)
>>> pm_runtime_set_active(&pdev->dev);
>>> pm_runtime_enable(&pdev->dev);
>>> - /*
>>> - * System register based devices could match the
>>> - * HW by reading appropriate registers on the HW
>>> - * and thus we could skip the PID.
>>> - */
>>> - ret = etm4_probe(&pdev->dev, 0);
>>> + ret = etm4_probe(&pdev->dev);
>>> pm_runtime_put(&pdev->dev);
>>> return ret;
>>> diff --git a/include/linux/coresight.h b/include/linux/coresight.h
>>> index f19a47b9bb5a..f85b041ea475 100644
>>> --- a/include/linux/coresight.h
>>> +++ b/include/linux/coresight.h
>>> @@ -370,6 +370,18 @@ static inline u32 csdev_access_relaxed_read32(struct csdev_access *csa,
>>> return csa->read(offset, true, false);
>>> }
>>> +#define CORESIGHT_PIDRn(i) (0xFE0 + ((i) * 4))
>>> +
>>> +static inline u32 coresight_get_pid(struct csdev_access *csa)
>>> +{
>>> + u32 i, pid = 0;
>>> +
>>> + for (i = 0; i < 4; i++)
>>> + pid |= csdev_access_relaxed_read32(csa, CORESIGHT_PIDRn(i)) << (i * 8);
>>
>> Given the above, we could make this iomem specific.
>
> We could change coresight_get_pid() to take iomem base address instead
> and fetch the pid. But is not the existing csdev_access based approach
> better and more generic ?
Yes, true, lets leave it with csdev_access, as it is coresight specific
and not ETMv4.
Cheers
Suzuki
More information about the linux-arm-kernel
mailing list